AutoCodes – Chevrolet – P0650 2016 Chevrolet Silverado

P0650 2016 Chevrolet Silverado Code - Malfunction Indicator Lamp Control Circuit

Quick Answer

The Malfunction Indicator Lamp (MIL) illuminates to inform the driver that an emission system fault has occurred, and the powertrain control system requires service. Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0650 2016 Chevrolet Silverado indicates Malfunction Indicator Lamp Control Circuit.
Common causes: Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 512

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0650 2016 Chevrolet Silverado Description

The Malfunction Indicator Lamp (MIL) illuminates to inform the driver that an emission system fault has occurred, and the powertrain control system requires service. Ignition voltage is supplied directly to the MIL. The Engine Control Module (ECM) turns the MIL ON by grounding the MIL control circuit when the emission system fault occurs. Under normal operating conditions, the MIL should be ON only when the ignition is ON, and the engine is OFF. The Diagnostic Trouble Code (DTC) will be set when the ECM detects low voltage during the MIL control circuit driver OFF state. This indicates either a shorted to ground or an open MIL control circuit.

OBDII Code P0650 2016 Chevrolet Silverado - Malfunction Indicator Lamp Control Circuit - AutoCodes.com — P0650 2016 Chevrolet Silverado Code - Malfunction Indicator Lamp Control Circuit

What does this mean?

What are the Possible Causes of the DTC P0650 2016 Chevrolet Silverado?

Faulty Instrument Cluster
Instrument Cluster harness is open or shorted
Instrument Cluster circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0650 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

If the condition is intermittent, move the related harnesses and connectors while monitoring the scan tool MIL control circuit status parameters. Perform this test with the ignition ON and the engine OFF, and with the engine running. The MIL control circuit status parameters change from OK or Not Run to Malfunction if there is a condition with a circuit or a connection.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0650 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0650 2016 Chevrolet Silverado code?

Need more information on how to fix the P0650 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0650 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0650 2016 Chevrolet Silverado Code

What does the OBDII code P0650 mean for a 2016 Chevrolet Silverado?

The P0650 code indicates a problem with the Malfunction Indicator Lamp (MIL) Control Circuit, which is responsible for illuminating the check engine light when a fault is detected.

What are the symptoms of code P0650 in a 2016 Chevrolet Silverado?

The most common symptom is that the check engine light does not illuminate when it should, such as during the ignition cycle or when a fault is detected.

What causes the P0650 code in a 2016 Chevrolet Silverado?

Possible causes include a faulty MIL bulb, a burned-out LED in the instrument cluster, damaged wiring or connectors, or a malfunctioning Powertrain Control Module (PCM).

Can I drive my 2016 Chevrolet Silverado with a P0650 code?

While the truck may still run normally, it is not recommended to ignore this code, as the MIL not functioning properly can prevent you from being alerted to other serious issues.

How is the P0650 code diagnosed in a 2016 Chevrolet Silverado?

A technician will inspect the MIL bulb or LED, check the wiring and connectors for damage, and use a scan tool to monitor the MIL control circuit for proper operation.

How do you fix the P0650 code on a 2016 Chevrolet Silverado?

Repairs may include replacing a faulty MIL bulb or LED, repairing or replacing damaged wiring, or reprogramming or replacing the PCM if it is found to be defective.

Can a blown fuse cause the P0650 code in a 2016 Chevrolet Silverado?

Yes, a blown fuse in the instrument cluster or related circuits can disrupt the MIL control circuit and trigger the P0650 code.

How much does it cost to repair the P0650 code on a 2016 Chevrolet Silverado?

Repair costs can vary but typically range from $50 to $300, depending on whether the issue is with the bulb, wiring, or PCM.

Is it possible for the PCM to be the root cause of the P0650 code?

Yes, a faulty PCM or corrupted software can cause the MIL control circuit to malfunction and trigger the P0650 code.

Can a P0650 code affect emissions testing for a 2016 Chevrolet Silverado?

Yes, the P0650 code can cause your vehicle to fail an emissions test since the MIL is required to operate properly to monitor emissions-related systems.