AutoCodes – Nissan – P0643 2011 Nissan Sentra

P0643 2011 Nissan Sentra Code - Sensor Power Supply Circuit Short

Quick Answer

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0643 2011 Nissan Sentra indicates Sensor Power Supply Circuit Short.
Common causes
Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,503
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 01, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0643 2011 Nissan Sentra Description

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.
OBDII Code P0643 2011 Nissan Sentra - Sensor Power Supply Circuit Short - AutoCodes.com
P0643 2011 Nissan Sentra Code - Sensor Power Supply Circuit Short

What are the Possible Causes of the DTC P0643 2011 Nissan Sentra?

  • Faulty Engine Control Module (ECM)
  • ECM harness is open or shorted
  • ECM circuit poor electrical connection
  • Shorted sensor on 5 volt circuit
  • Accelerator pedal position sensor (APP sensor 1)
  • Power steering pressure sensor
  • EVAP control system pressure sensor
  • Refrigerant pressure sensor

How to Fix the DTC P0643 2011 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0643 2011 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0643 2011 Nissan Sentra code?

Need more information on how to fix the P0643 2011 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0643 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0643 2011 Nissan Sentra Code

1. What are the common symptoms of OBDII code P0643 in a 2011 Nissan Sentra?

- Common symptoms include the check engine light being illuminated, decreased fuel efficiency, and potential issues with engine performance.

2. What does OBDII code P0643 on a 2011 Nissan Sentra indicate?

- OBDII code P0643 typically indicates a problem with the Sensor Power Supply Circuit Short in the vehicle's engine control module.

3. What are the possible causes of OBDII code P0643 in a 2011 Nissan Sentra?

- Possible causes of code P0643 include a faulty sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module itself.

4. How can I diagnose the Sensor Power Supply Circuit Short in a 2011 Nissan Sentra?

- Diagnosing the issue involves using a scan tool to read the OBDII codes, checking the sensor and its wiring for damage, and testing the voltage levels in the circuit.

5. Can I continue driving my 2011 Nissan Sentra with OBDII code P0643?

- It is not advisable to continue driving with code P0643, as it can lead to further damage to the vehicle's components and may result in decreased performance.

6. Is it possible to repair OBDII code P0643 in a 2011 Nissan Sentra myself?

- Depending on your skill level, you may be able to repair the issue yourself by replacing the faulty sensor, repairing damaged wiring, or addressing any issues with the engine control module.

7. How much does it typically cost to repair OBDII code P0643 in a 2011 Nissan Sentra?

- The cost of repairing code P0643 can vary depending on the specific issue, but it may range from $100 to $500 for parts and labor at a professional repair shop.

8. Are there any preventive measures to avoid OBDII code P0643 in a 2011 Nissan Sentra?

- Regular maintenance, such as checking and replacing sensors as needed, inspecting wiring for damage, and ensuring proper electrical connections, can help prevent code P0643 from occurring.

9. Will resetting the OBDII code P0643 in a 2011 Nissan Sentra make it go away permanently?

- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle for some time.

10. How urgent is it to address OBDII code P0643 in a 2011 Nissan Sentra?

- It is recommended to address the issue promptly to prevent any further damage to the vehicle and ensure optimal performance and fuel efficiency.

Discuss the causes and fixes for P0643 2011 Nissan Sentra OBDII Code

Code P0643 2011 Nissan Sentra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play