AutoCodesNissan – P0643 2010 Nissan Rogue

P0643 2010 Nissan Rogue Code - Sensor Power Supply Circuit Short

Quick Answer

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0643 2010 Nissan Rogue indicates Sensor Power Supply Circuit Short.
Common causes
Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,922
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 01, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0643 2010 Nissan Rogue Description

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.
OBDII Code P0643 2010 Nissan Rogue - Sensor Power Supply Circuit Short - AutoCodes.com
P0643 2010 Nissan Rogue Code - Sensor Power Supply Circuit Short

What are the Possible Causes of the DTC P0643 2010 Nissan Rogue?

  • Faulty Engine Control Module (ECM)
  • ECM harness is open or shorted
  • ECM circuit poor electrical connection
  • Shorted sensor on 5 volt circuit
  • Accelerator pedal position sensor (APP sensor 1)
  • Power steering pressure sensor
  • EVAP control system pressure sensor
  • Refrigerant pressure sensor

How to Fix the DTC P0643 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0643 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0643 2010 Nissan Rogue code?

Need more information on how to fix the P0643 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0643 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0643 2010 Nissan Rogue Code

What does the OBDII code P0643 mean for a 2010 Nissan Rogue?

P0643 indicates a malfunction in the sensor power supply circuit, which may affect various sensors in the vehicle’s electronic system.

What symptoms might I experience if my Nissan Rogue has the P0643 code?

Common symptoms include the check engine light being on, poor engine performance, and issues with various sensors not functioning properly.

What could cause the P0643 code to trigger in my Nissan Rogue?

Potential causes include a short circuit in the wiring, a faulty Engine Control Module (ECM), or problems with the sensors that rely on the power supply.

How can I diagnose the P0643 code in my Nissan Rogue?

Start by visually inspecting the wiring and connectors for damage. Then use an OBDII scanner to check for related codes and test the affected sensors for proper voltage and functionality.

What are some common repairs for the P0643 code?

Repairs may include fixing or replacing damaged wiring, replacing faulty sensors, or, in some cases, replacing the ECM if it's determined to be the source of the issue.

Can I drive my Nissan Rogue with the P0643 code?

While it may be possible to drive the vehicle, it’s not recommended, as the engine performance may be compromised and further damage could occur.

How much does it typically cost to fix the P0643 code in a Nissan Rogue?

Repair costs can vary widely but typically range from $100 to $500, depending on the underlying issue and whether parts need to be replaced.

Is the P0643 code serious?

Yes, it can be serious as it may indicate a problem affecting multiple sensors, leading to poor performance and potential safety issues if not addressed.

Will clearing the P0643 code fix my Nissan Rogue?

Clearing the code may turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will likely return.

Discuss the causes and fixes for P0643 2010 Nissan Rogue OBDII Code

Code P0643 2010 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play