AutoCodes – Nissan – P0643 2009 Nissan Rogue

P0643 2009 Nissan Rogue Code - Sensor Power Supply Circuit Short

Quick Answer

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0643 2009 Nissan Rogue indicates Sensor Power Supply Circuit Short.
Common causes
Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,624
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 01, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0643 2009 Nissan Rogue Description

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.
OBDII Code P0643 2009 Nissan Rogue - Sensor Power Supply Circuit Short - AutoCodes.com
P0643 2009 Nissan Rogue Code - Sensor Power Supply Circuit Short

What are the Possible Causes of the DTC P0643 2009 Nissan Rogue?

  • Faulty Engine Control Module (ECM)
  • ECM harness is open or shorted
  • ECM circuit poor electrical connection
  • Shorted sensor on 5 volt circuit
  • Accelerator pedal position sensor (APP sensor 1)
  • Power steering pressure sensor
  • EVAP control system pressure sensor
  • Refrigerant pressure sensor

How to Fix the DTC P0643 2009 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0643 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0643 2009 Nissan Rogue code?

Need more information on how to fix the P0643 2009 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0643 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0643 2009 Nissan Rogue Code

1. What does the OBDII code P0643 mean on a 2009 Nissan Rogue?

P0643 indicates a problem with the sensor power supply circuit, often due to a short or an issue with the circuit voltage being too high or too low.

2. What are the common symptoms of P0643 in a 2009 Nissan Rogue?

Symptoms may include the check engine light turning on, reduced engine performance, difficulty starting, poor fuel efficiency, or erratic sensor readings.

3. What causes the P0643 code to appear in a 2009 Nissan Rogue?

Common causes include a shorted or damaged wiring harness, a faulty sensor, a malfunctioning powertrain control module (PCM), or corrosion at electrical connections.

4. How can I diagnose the P0643 code on my 2009 Nissan Rogue?

Start by inspecting the wiring and connectors for damage or corrosion, test the voltage on the sensor power supply circuit, and check the functionality of connected sensors.

5. Can I drive my 2009 Nissan Rogue with a P0643 code?

It is not recommended, as this code can lead to poor performance and potential damage to other components if left unresolved.

6. How do you fix the P0643 code on a 2009 Nissan Rogue?

Repairs may involve replacing damaged wiring, repairing corroded connectors, replacing a faulty sensor, or, in rare cases, reprogramming or replacing the PCM.

7. How much does it cost to fix a P0643 code on a 2009 Nissan Rogue?

Costs vary depending on the root cause, but minor issues like wiring repairs may cost around $100-$300, while PCM replacement or reprogramming can cost $500-$1,200.

8. What sensors are affected by the P0643 code in a 2009 Nissan Rogue?

This code can affect sensors that rely on the 5-volt reference circuit, such as the throttle position sensor, MAP sensor, or fuel pressure sensor.

9. Can a weak battery cause the P0643 code in a 2009 Nissan Rogue?

While uncommon, a weak or failing battery can cause electrical issues that might contribute to this code by affecting voltage stability.

10. Will clearing the code fix P0643 on my 2009 Nissan Rogue?

Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.

Discuss the causes and fixes for P0643 2009 Nissan Rogue OBDII Code

Code P0643 2009 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play