AutoCodes – Nissan – P0643 2008 Nissan Rogue

P0643 2008 Nissan Rogue Code - Sensor Power Supply Circuit Short

Quick Answer

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0643 2008 Nissan Rogue indicates Sensor Power Supply Circuit Short.
Common causes
Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,557
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 01, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0643 2008 Nissan Rogue Description

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.
OBDII Code P0643 2008 Nissan Rogue - Sensor Power Supply Circuit Short - AutoCodes.com
P0643 2008 Nissan Rogue Code - Sensor Power Supply Circuit Short

What are the Possible Causes of the DTC P0643 2008 Nissan Rogue?

  • Faulty Engine Control Module (ECM)
  • ECM harness is open or shorted
  • ECM circuit poor electrical connection
  • Shorted sensor on 5 volt circuit
  • Accelerator pedal position sensor (APP sensor 1)
  • Power steering pressure sensor
  • EVAP control system pressure sensor
  • Refrigerant pressure sensor

How to Fix the DTC P0643 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0643 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0643 2008 Nissan Rogue code?

Need more information on how to fix the P0643 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0643 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0643 2008 Nissan Rogue Code

1. What does the OBDII code P0643 on a 2008 Nissan Rogue indicate?

The code P0643 suggests a fault with the Sensor Power Supply Circuit, specifically a short circuit.

2. What are common symptoms of a Sensor Power Supply Circuit short on a 2008 Nissan Rogue?

Common symptoms include engine misfires, rough idling, stalling, poor fuel efficiency, and a check engine light.

3. What are possible causes of the P0643 code on a 2008 Nissan Rogue?

Potential causes include damaged wiring or connectors in the sensor power supply circuit, a faulty sensor, or a problem with the engine control module.

4. How can I diagnose the Sensor Power Supply Circuit short on my 2008 Nissan Rogue?

Diagnosing the issue involves inspecting the wiring and connectors for damage, testing the sensor's functionality, and checking the engine control module.

5. Can I drive my 2008 Nissan Rogue with the P0643 code?

It is generally not recommended to drive the vehicle with the P0643 code, as it can lead to further damage and poor performance.

6. How do I repair a Sensor Power Supply Circuit short on a 2008 Nissan Rogue?

Repairing the issue may involve repairing or replacing damaged wiring or connectors, replacing the faulty sensor, or reprogramming the engine control module.

7. Can I reset the P0643 code on my 2008 Nissan Rogue without fixing the issue?

While you can clear the code temporarily, it is essential to address the underlying problem to prevent further issues.

8. Are there any DIY tips for fixing the P0643 code on a 2008 Nissan Rogue?

DIY tips may include checking for visible damage to wiring, ensuring connectors are secure, and testing the sensor with a multimeter.

9. How much does it typically cost to repair the P0643 code on a 2008 Nissan Rogue?

The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $500 or more, including parts and labor.

10. Is the Sensor Power Supply Circuit short a common issue in 2008 Nissan Rogues?

While not extremely common, issues with the Sensor Power Supply Circuit can occur in 2008 Nissan Rogues due to various factors such as age and wear.

Discuss the causes and fixes for P0643 2008 Nissan Rogue OBDII Code

Code P0643 2008 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play