P0625 2011 Ford Fusion Code - Generator Field Terminal Circuit Low
Quick Answer
The Powertrain Control Module (PCM) monitors generator load from the generator/regulator in the form of frequency. Common causes include Faulty battery, Generator drive belt missing or loose, Faulty Generator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0625 2011 Ford Fusion indicates Generator Field Terminal Circuit Low.
- Common causes
- Common causes include Faulty battery, Generator drive belt missing or loose, Faulty Generator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0625 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0625 2011 Ford Fusion?
- Faulty battery
- Generator drive belt missing or loose
- Faulty Generator
- Generator harness is open or shorted
- Generator circuit poor electrical connection
How to Fix the DTC P0625 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0625 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0625 2011 Ford Fusion code?
Need more information on how to fix the P0625 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0625 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0625 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0625 in a 2011 Ford Fusion?
- Common symptoms include issues with the vehicle's charging system, such as the battery not charging properly, dimming lights, or difficulty starting the car.
2. What does the OBDII code P0625 "Generator Field Terminal Circuit Low" mean for a 2011 Ford Fusion?
- This code indicates that there is a low voltage condition in the generator field circuit, which can affect the charging system of the vehicle.
3. What are the possible causes of OBDII code P0625 in a 2011 Ford Fusion?
- Possible causes include a faulty generator, damaged wiring in the generator field circuit, a defective voltage regulator, or a problem with the PCM (Powertrain Control Module).
4. How can I diagnose the OBDII code P0625 in my 2011 Ford Fusion?
- Diagnosis involves checking the generator, inspecting the wiring for any damage, testing the voltage regulator, and scanning the PCM for any related faults.
5. Can I still drive my 2011 Ford Fusion with the OBDII code P0625 present?
- It is not recommended to drive the vehicle with this code present, as it can lead to a drained battery and potential stalling of the vehicle.
6. How can I repair OBDII code P0625 in my 2011 Ford Fusion?
- Repair options include replacing the faulty generator, repairing any damaged wiring, replacing the voltage regulator, or addressing any issues with the PCM.
7. Is it possible to reset the OBDII code P0625 in a 2011 Ford Fusion without fixing the underlying issue?
- While you can clear the code temporarily, it will likely return until the root cause of the problem is resolved.
8. Will OBDII code P0625 cause any long-term damage to my 2011 Ford Fusion if left untreated?
- Ignoring this code can lead to a drained battery, potential electrical system damage, and ultimately, affect the overall performance of the vehicle.
9. Can a DIY enthusiast fix OBDII code P0625 in a 2011 Ford Fusion?
- Depending on the skill level and access to tools, some DIY enthusiasts may be able to address this code by following repair guides and procedures.
10. How much can I expect to pay for repairing OBDII code P0625 in a 2011 Ford Fusion at a professional auto repair shop?
- Repair costs can vary but generally range from $200 to $500, depending on the specific cause of the issue and the labor rates in your area.
Discuss the causes and fixes for P0625 2011 Ford Fusion OBDII Code
Code P0625 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
