AutoCodes – GMC – P0622 2014 GMC Sierra

P0622 2014 GMC Sierra Code - Generator F-Terminal Circuit

Quick Answer

The Engine Control Module (ECM) uses the Generator field duty cycle signal circuit, or F-terminal circuit, to monitor the duty cycle of the Generator. Common causes include Battery charge, Faulty Generator, Generator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0622 2014 GMC Sierra indicates Generator F-Terminal Circuit.
Common causes
Common causes include Battery charge, Faulty Generator, Generator harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 295
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 15, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0622 2014 GMC Sierra Description

The Engine Control Module (ECM) uses the Generator field duty cycle signal circuit, or F-terminal circuit, to monitor the duty cycle of the Generator. The Generator field duty cycle signal circuit connects to the high side of the field windings in the generator. A Pulse Width Modulated (PWM) high side driver in the voltage regulator turns the field windings ON and OFF. The ECM uses the PWM signal input to determine the generator load on the engine. This allows the ECM to adjust the idle speed to compensate for high electrical loads. The ECM monitors the status of the generator field duty cycle signal circuit. When the ignition is ON and the engine is OFF, the ECM should detect a duty cycle near 0%. When the engine is running, the duty cycle should be between 5 - 99%. The Diagnostic Trouble Code (DTC) will be set if the ignition is ON, and the engine OFF (Prior to Ignition ON, the ignition must have been OFF for at least 5 s), the ECM detects a PWM signal that is greater than 65% for 5 s.
OBDII Code P0622 2014 GMC Sierra - Generator F-Terminal Circuit - AutoCodes.com
P0622 2014 GMC Sierra Code - Generator F-Terminal Circuit

What are the Possible Causes of the DTC P0622 2014 GMC Sierra?

  • Battery charge
  • Faulty Generator
  • Generator harness is open or shorted
  • Generator circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0622 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0622 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0622 2014 GMC Sierra code?

Need more information on how to fix the P0622 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0622 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0622 2014 GMC Sierra Code

1. What does the OBDII code P0622 mean on a 2014 GMC Sierra?

P0622 indicates a problem with the Generator F-Terminal Circuit, which monitors and controls the alternator's charging system.

2. What are the common symptoms of the P0622 code in a 2014 GMC Sierra?

Symptoms may include a lit check engine light, battery warning light, charging system failure, dimming headlights, and a dead battery.

3. What causes the P0622 code to appear?

Common causes include a faulty alternator, damaged wiring or connectors in the F-terminal circuit, a blown fuse, or a malfunctioning PCM (Powertrain Control Module).

4. Can I drive my 2014 GMC Sierra with the P0622 code?

It's not recommended to drive with this code, as it can lead to charging system failure, leaving your vehicle unable to start or operate properly.

5. How do I diagnose the P0622 code on my 2014 GMC Sierra?

Start by inspecting the alternator, F-terminal wiring, and connectors for damage or corrosion. Test the alternator output and check for blown fuses or PCM issues.

6. How do I fix the P0622 code on a 2014 GMC Sierra?

Repairs may include replacing the alternator, repairing or replacing damaged wiring or connectors, replacing a blown fuse, or reprogramming or replacing the PCM.

7. Can a bad battery cause the P0622 code?

While unlikely, a bad battery can exacerbate charging system issues. It's important to test the battery along with the alternator and wiring.

8. What tools are needed to troubleshoot the P0622 code?

You'll need a digital multimeter to test the circuit, a scan tool to read and clear codes, and possibly wiring diagrams for the charging system.

9. How much does it cost to fix the P0622 code on a 2014 GMC Sierra?

Costs vary depending on the issue. Replacing an alternator may cost $400-$800, while wiring repairs or PCM replacement could add to the expense.

10. Could a software issue trigger the P0622 code?

Yes, a PCM software glitch or outdated programming could cause this code. In some cases, reprogramming the PCM may resolve the issue.

Discuss the causes and fixes for P0622 2014 GMC Sierra OBDII Code

Code P0622 2014 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play