AutoCodes – Ford – P0620 2007 Ford Fusion

P0620 2007 Ford Fusion Code - Generator Control Circuit

Quick Answer

The Engine Control Module (ECM) uses the generator turn on signal circuit to control the generator. Common causes include Battery charge, Faulty Generator, Generator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0620 2007 Ford Fusion indicates Generator Control Circuit.
Common causes: Common causes include Battery charge, Faulty Generator, Generator harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,262

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0620 2007 Ford Fusion Description

The Engine Control Module (ECM) uses the generator turn on signal circuit to control the generator. A high side driver within the ECM allows the ECM to turn the generator ON and OFF. When Generator operation is desired, the ECM sends a 5 volt signal to the voltage regulator via the generator turn on signal circuit. This causes the voltage regulator to begin controlling the generator field circuit. Once the Generator is enabled by the ECM, the voltage regulator controls generator output independently of the ECM. Under certain operating conditions, the ECM can turn Off the generator by turning Off the 5 volt signal on the generator turn on signal circuit.

OBDII Code P0620 2007 Ford Fusion - Generator Control Circuit - AutoCodes.com — P0620 2007 Ford Fusion Code - Generator Control Circuit

What does this mean?

What are the Possible Causes of the DTC P0620 2007 Ford Fusion?

Battery charge
Faulty Generator
Generator harness is open or shorted
Generator circuit poor electrical connection
Engine Control Module (ECM) controlled generator
Faulty ECM

How to Fix the DTC P0620 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0620 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0620 2007 Ford Fusion code?

Need more information on how to fix the P0620 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0620 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0620 2007 Ford Fusion Code

1. What does the OBDII code P0620 for a 2007 Ford Fusion indicate?

The P0620 code specifically points to an issue with the Generator Control Circuit in the vehicle.

2. What are the common symptoms associated with the P0620 code on a 2007 Ford Fusion?

Common symptoms may include dimming lights, battery not charging properly, or the vehicle stalling due to a lack of power.

3. What are the potential causes of the P0620 code on a 2007 Ford Fusion?

Possible causes include a faulty generator, damaged wiring or connectors in the control circuit, or a defective generator control module.

4. How can I diagnose the P0620 code on my 2007 Ford Fusion?

Diagnosing the P0620 code involves using a scan tool to check for the code, inspecting the generator control module and related components, and testing the circuit for any faults.

5. Can I still drive my 2007 Ford Fusion with the P0620 code present?

It is not recommended to drive your Fusion with the P0620 code active, as it can lead to issues like battery drainage or stalling while driving.

6. What are the repair options for fixing the P0620 code on a 2007 Ford Fusion?

Repair options may include replacing the generator control module, repairing any damaged wiring or connectors, or addressing any issues with the generator itself.

7. How much does it typically cost to repair the P0620 code on a 2007 Ford Fusion?

The cost of repairing the P0620 code can vary depending on the extent of the issue and the specific repairs needed, but it may range from $200 to $500 or more.

8. Can I reset the P0620 code on my 2007 Ford Fusion without making any repairs?

While you can clear the code using a scan tool, it is essential to address the underlying issue causing the code to prevent further problems.

9. Are there any preventive maintenance tips to avoid the P0620 code in a 2007 Ford Fusion?

Regularly inspecting the charging system, checking the battery's condition, and addressing any electrical issues promptly can help prevent the P0620 code from occurring.

10. How long does it take to repair the P0620 code on a 2007 Ford Fusion?

The repair time for the P0620 code can vary based on the specific cause of the issue and the expertise of the technician, but it may typically take a few hours to a full day to complete.