AutoCodes – Jeep – P0617 Jeep

P0617 Jeep Code - Starter Control Circuit High

Quick Answer

The starter relay is an electromechanical device that switches battery current to the pull-in coil of the starter solenoid when the ignition switch is turned to the Start position. Common causes include Faulty Starter Relay, Starter Relay harness is open or shorted, Starter Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0617 Jeep indicates Starter Control Circuit High.
Common causes: Common causes include Faulty Starter Relay, Starter Relay harness is open or shorted, Starter Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 803

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 31, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0617 Jeep Description

The starter relay is an electromechanical device that switches battery current to the pull-in coil of the starter solenoid when the ignition switch is turned to the Start position. The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module (PCM) detects a short to voltage on the Starter Relay Control circuit for 0.5 seconds.

OBDII Code P0617 Jeep - Starter Control Circuit High - AutoCodes.com — P0617 Jeep Code - Starter Control Circuit High

What does this mean?

What are the Possible Causes of the DTC P0617 Jeep?

Faulty Starter Relay
Starter Relay harness is open or shorted
Starter Relay circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0617 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0617 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0617 Jeep code?

Need more information on how to fix the P0617 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0617 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0617 Jeep Code

1. What are the common symptoms of OBDII code P0617 in a Jeep related to the starter control circuit high?

- Common symptoms include difficulty starting the vehicle, intermittent starting issues, and the engine not turning over.

2. What are the possible causes of OBDII code P0617 in a Jeep?

- Possible causes include a faulty starter relay, damaged wiring in the starter control circuit, or a malfunctioning starter motor.

3. How can I diagnose the OBDII code P0617 in my Jeep?

- You can diagnose the code by checking the condition of the starter relay, inspecting the wiring for any damage, and testing the starter motor for proper functioning.

4. Can a weak battery cause OBDII code P0617 in a Jeep?

- Yes, a weak or failing battery can sometimes trigger the code due to insufficient power reaching the starter motor.

5. What are some repair tips for fixing OBDII code P0617 in a Jeep?

- Repair tips include ensuring the battery is fully charged, replacing a faulty starter relay, repairing any damaged wiring, and testing the starter motor.

6. Is it safe to continue driving my Jeep with OBDII code P0617?

- It is not recommended to drive your Jeep with this code as it can lead to potential starting issues and further damage to the starter system.

7. Can weather conditions impact OBDII code P0617 in a Jeep?

- Extreme weather conditions such as extreme cold or heat can sometimes exacerbate starting issues related to this code.

8. How much does it typically cost to repair OBDII code P0617 in a Jeep?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $500 including parts and labor.

9. Can resetting the OBDII system clear code P0617 in a Jeep?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear.

10. Can a DIY enthusiast fix OBDII code P0617 in a Jeep?

- Depending on the level of expertise, a DIY enthusiast may be able to fix the issue by following repair guides and using basic tools, but professional help is recommended for complex issues.