AutoCodes.com
Login with Google
AutoCodes – Acura – P0617 Acura

P0617 Acura Code - Starter Cut Relay Diagnosis Circuit High Voltage

Quick Answer

The starter control system prevents the starter from accidentally activating when the shift position is not in the P or N position/mode, or when the engine is running. Common causes include Faulty Starter Cut Relay 1 (Built into the Relay Circuit Board), Starter Cut Relay 1 harness is open or shorted, Starter Cut Relay 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0617 Acura indicates Starter Cut Relay Diagnosis Circuit High Voltage.
Common causes
Common causes include Faulty Starter Cut Relay 1 (Built into the Relay Circuit Board), Starter Cut Relay 1 harness is open or shorted, Starter Cut Relay 1 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 271
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Jan 03, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0617 Acura Description

The starter control system prevents the starter from accidentally activating when the shift position is not in the P or N position/mode, or when the engine is running. If the vehicle is turned mistakenly while the shift position is not in P or N or while the engine is running, the Powertrain Control Module (PCM) will stop power to the starter cut relays. However, cranking to return from an auto idle stop does not correspond to this. In this system, two starter cut relays are connected in series (starter cut relay 1, starter cut relay 2) to prevent the starter from running continuously due to a starter cut relay malfunction. Also, a diagnosis line (START DIAG) is connected to monitor the voltage between the starter cut relay 1 and starter cut relay 2. Based on the diagnosis line signals, the PCM detects an OPEN malfunction of the diagnosis line, an ON malfunction of starter cut relay 1, and an ON malfunction of starter cut relay 2. The PCM also equipped with return signal circuits of starter cut relay 1 and starter cut relay 2 to detect an OFF malfunction. If the voltage of the diagnosis line (START DIAG) is a specified voltage for a set time when the starter is OFF (STS OFF), the PCM detects an ON malfunction of starter cut relay 1 and stores a Diagnostic Trouble Code (DTC).
OBDII Code P0617 Acura - Starter Cut Relay Diagnosis Circuit High Voltage - AutoCodes.com
P0617 Acura Code - Starter Cut Relay Diagnosis Circuit High Voltage
What does this mean?

What are the Possible Causes of the DTC P0617 Acura?

  • Faulty Starter Cut Relay 1 (Built into the Relay Circuit Board)
  • Starter Cut Relay 1 harness is open or shorted
  • Starter Cut Relay 1 circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0617 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0617 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0617 Acura code?

Need more information on how to fix the P0617 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0617 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0617 Acura Code

1. What does the OBDII code P0617 mean on an Acura?

The P0617 code indicates "Starter Cut Relay Diagnosis Circuit High Voltage," meaning the ECU has detected an abnormally high voltage in the starter cut relay circuit.

2. What are the symptoms of the P0617 code on an Acura?

Common symptoms include difficulty starting the engine, intermittent starting issues, or the starter motor not engaging at all.

3. What causes the P0617 code to appear?

Potential causes include a faulty starter cut relay, damaged wiring or connectors in the circuit, a failing starter motor, or a malfunctioning PCM (Powertrain Control Module).

4. Can a weak battery cause the P0617 code on an Acura?

Yes, a weak or failing battery can cause voltage irregularities that might trigger the P0617 code.

5. How do you diagnose the P0617 code on an Acura?

Diagnosis involves checking the starter cut relay, inspecting the wiring and connectors for damage or corrosion, and testing the relay circuit voltage to ensure it falls within the specified range.

6. Can I drive my Acura with a P0617 code?

While it may be possible to drive, starting issues may leave you stranded. It’s best to address the problem as soon as possible.

7. How do you fix the P0617 code on an Acura?

Repairs may include replacing the starter cut relay, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/repairing the PCM if it’s faulty.

8. How much does it cost to fix the P0617 code on an Acura?

Repair costs vary, but replacing a starter cut relay typically costs $50–$150 for parts and labor. Wiring or PCM repairs can cost significantly more.

9. Can a faulty starter motor trigger the P0617 code?

Yes, a failing starter motor can draw excess current or cause voltage irregularities that may trigger this code.

10. Will clearing the P0617 code fix the problem?

Clearing the code may temporarily remove the warning, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P0617 Acura OBDII Code

Submit a New Comment

Code P0617 Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play