AutoCodes – Saab – P0607 Saab

P0607 Saab Code - Control Module Performance

Quick Answer

This Diagnostic Trouble Code (DTC) applies to internal microprocessor integrity conditions within the Engine Control Module (ECM). Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0607 Saab indicates Control Module Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,899

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 01, 2021

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0607 Saab Description

This Diagnostic Trouble Code (DTC) applies to internal microprocessor integrity conditions within the Engine Control Module (ECM). This diagnostic also addresses whether or not the ECM is not programmed.

OBDII Code P0607 Saab - Control Module Performance - AutoCodes.com — P0607 Saab Code - Control Module Performance

What does this mean?

What are the Possible Causes of the DTC P0607 Saab?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) harness is open or shorted
Engine Control Module (ECM) circuit poor electrical connection

How to Fix the DTC P0607 Saab?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0607 Saab code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0607 Saab code?

Need more information on how to fix the P0607 Saab code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0607 Saab code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0607 Saab Code

1. What are the common symptoms of OBDII code P0607 in a Saab?

The common symptoms of OBDII code P0607 in a Saab include engine stalling, rough idling, poor acceleration, and the illumination of the Check Engine Light.

2. What does OBDII code P0607 "Control Module Performance" mean for a Saab?

OBDII code P0607 indicates a performance issue with the engine control module (ECM) in a Saab vehicle.

3. What are the possible causes of OBDII code P0607 in a Saab?

The possible causes of OBDII code P0607 in a Saab include a faulty ECM, damaged wiring or connectors, software issues, or a weak battery.

4. How can I diagnose OBDII code P0607 in my Saab?

Diagnosing OBDII code P0607 in a Saab involves using a scan tool to read the code, checking for any other related codes, inspecting the ECM wiring and connectors, and testing the battery voltage.

5. Can I continue driving my Saab with OBDII code P0607?

It is not recommended to continue driving your Saab with OBDII code P0607, as it can lead to further engine performance issues and potential damage.

6. How can I repair OBDII code P0607 in my Saab?

Repairing OBDII code P0607 in a Saab may involve replacing the ECM, repairing any damaged wiring or connectors, updating the software, and ensuring a strong battery connection.

7. Is it possible to reset OBDII code P0607 in a Saab?

Resetting OBDII code P0607 in a Saab can be done using a scan tool to clear the code after the underlying issue has been diagnosed and repaired.

8. Will OBDII code P0607 cause my Saab to fail an emissions test?

Yes, OBDII code P0607 can cause your Saab to fail an emissions test, as it indicates a problem with the engine control module affecting the vehicle's emissions control system.

9. How much does it cost to fix OBDII code P0607 in a Saab?

The cost to fix OBDII code P0607 in a Saab can vary depending on the underlying cause, but it may range from a few hundred to over a thousand dollars for parts and labor.

10. Can a DIY enthusiast repair OBDII code P0607 in a Saab?

While some DIY enthusiasts may have the skills to diagnose and repair OBDII code P0607 in a Saab, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair.