P0607 2012 Nissan Rogue Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2012 Nissan Rogue indicates Control Module Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2012 Nissan Rogue Description
What are the Possible Causes of the DTC P0607 2012 Nissan Rogue?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2012 Nissan Rogue code?
Need more information on how to fix the P0607 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2012 Nissan Rogue Code
1. What does the OBDII code P0607 mean in a 2012 Nissan Rogue?
This code indicates a "Control Module Performance" issue, meaning the Engine Control Module (ECM) is malfunctioning or detecting an internal fault.
2. What are the common symptoms of a P0607 code in a 2012 Nissan Rogue?
Symptoms may include poor engine performance, stalling, difficulty starting, reduced fuel efficiency, or the check engine light turning on.
3. What causes the P0607 code to be triggered in my Nissan Rogue?
Common causes include a malfunctioning ECM, electrical issues like poor connections or damaged wiring, or a low or failing battery.
4. Can a weak battery cause the P0607 code in a 2012 Nissan Rogue?
Yes, a weak or failing battery can cause voltage fluctuations that may trigger the P0607 code.
5. How do I diagnose the P0607 code in my 2012 Nissan Rogue?
Diagnosis involves checking for loose or corroded electrical connections, inspecting the battery and alternator, and testing the ECM for internal faults using a scan tool.
6. Is it safe to drive a 2012 Nissan Rogue with a P0607 code?
Driving with this code can be risky as it may lead to stalling or other performance issues. It's best to address the problem promptly to avoid potential safety hazards.
7. How can I fix the P0607 code in my 2012 Nissan Rogue?
Repairs may include cleaning or tightening electrical connections, replacing damaged wiring, updating or reprogramming the ECM, or replacing the ECM if necessary.
8. Does the P0607 code always mean the ECM is bad in a 2012 Nissan Rogue?
No, the code can also be triggered by wiring issues, low battery voltage, or other electrical faults. The ECM should only be replaced after ruling out these possibilities.
9. How much does it cost to repair a P0607 code in a 2012 Nissan Rogue?
Costs vary, but ECM replacement can range from $500 to $1200, while diagnosing and addressing wiring or battery issues may be significantly less expensive.
10. Can I clear the P0607 code myself on a 2012 Nissan Rogue?
You can clear the code with an OBDII scanner, but unless the underlying issue is fixed, the code will likely return. Proper diagnosis is essential.
Discuss the causes and fixes for P0607 2012 Nissan Rogue OBDII Code
Code P0607 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
