P0607 2011 Toyota Camry Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Exhaust Leak, Oxygen Sensor, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2011 Toyota Camry indicates Control Module Performance.
- Common causes
- Common causes include Exhaust Leak, Oxygen Sensor, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2011 Toyota Camry Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0607 2011 Toyota Camry?
- Exhaust Leak
- Oxygen Sensor
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2011 Toyota Camry code?
Need more information on how to fix the P0607 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2011 Toyota Camry Code
1. What does OBDII code P0607 mean on a 2011 Toyota Camry?
P0607 indicates a "Control Module Performance" issue, meaning the Engine Control Module (ECM) has detected an internal malfunction or fault.
2. What are the common symptoms of code P0607 in a 2011 Toyota Camry?
Symptoms include the Check Engine Light turning on, poor engine performance, stalling, difficulty starting, or the vehicle entering "limp" mode.
3. What causes the P0607 code in a 2011 Toyota Camry?
Common causes include a faulty ECM, damaged wiring, power supply issues, or an intermittent voltage problem.
4. Can a weak battery trigger the P0607 code in a 2011 Toyota Camry?
Yes, a weak or failing battery can cause voltage irregularities that may trigger P0607.
5. How do I fix the P0607 code on my 2011 Toyota Camry?
Start by checking the battery and charging system, inspecting ECM-related wiring for damage, and testing the ECM. In some cases, the ECM may need reprogramming or replacement.
6. Is the P0607 code serious on a 2011 Toyota Camry?
Yes, it can lead to drivability issues like stalling or poor performance. Addressing it promptly is recommended to avoid being stranded.
7. Can I still drive with the P0607 code on my 2011 Toyota Camry?
While the car may still run, driving with this code is not advisable as it can worsen performance issues or cause the vehicle to stall unexpectedly.
8. How much does it cost to fix the P0607 code on a 2011 Toyota Camry?
Repair costs vary. Replacing or reprogramming the ECM can cost anywhere from $300 to $1,200, depending on labor and parts.
9. Can a software update fix the P0607 code on a 2011 Toyota Camry?
In some cases, a software update or re-flashing the ECM can resolve the issue if it’s caused by a programming bug.
10. Do I need a professional mechanic to fix the P0607 code on my 2011 Toyota Camry?
Diagnosing and repairing ECM-related issues typically requires specialized tools and expertise, so seeking a professional mechanic is recommended.
Discuss the causes and fixes for P0607 2011 Toyota Camry OBDII Code
Code P0607 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
