P0607 2010 Toyota Camry Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Exhaust Leak, Oxygen Sensor, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2010 Toyota Camry indicates Control Module Performance.
- Common causes
- Common causes include Exhaust Leak, Oxygen Sensor, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2010 Toyota Camry Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0607 2010 Toyota Camry?
- Exhaust Leak
- Oxygen Sensor
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2010 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2010 Toyota Camry code?
Need more information on how to fix the P0607 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2010 Toyota Camry Code
1. What does the OBDII code P0607 mean on a 2010 Toyota Camry?
The P0607 code indicates a Control Module Performance issue, meaning the Engine Control Module (ECM) has detected an internal fault.
2. What are the common symptoms of the P0607 code in a 2010 Toyota Camry?
Symptoms may include the check engine light turning on, engine stalling, poor performance, erratic shifting, or difficulty starting the vehicle.
3. What causes the P0607 code to appear on a 2010 Toyota Camry?
Common causes include a faulty ECM, electrical issues such as damaged wiring or connectors, low battery voltage, or software glitches in the ECM.
4. Can a weak battery trigger the P0607 code on a 2010 Toyota Camry?
Yes, a weak or failing battery can cause the ECM to malfunction and trigger the P0607 code.
5. How do you diagnose the P0607 code on a 2010 Toyota Camry?
Diagnosis involves checking for additional codes, inspecting the ECM and wiring for damage, testing battery voltage, and verifying the ECM's software is up-to-date.
6. Can the P0607 code cause engine stalling in a 2010 Toyota Camry?
Yes, a malfunctioning ECM associated with the P0607 code can result in engine stalling or poor drivability.
7. How is the P0607 code fixed in a 2010 Toyota Camry?
Common fixes include reprogramming or replacing the ECM, repairing damaged wiring or connectors, and ensuring the battery and charging system are functioning properly.
8. Is it safe to drive a 2010 Toyota Camry with a P0607 code?
Driving with a P0607 code is not recommended, as it could lead to unexpected stalling or other performance issues that may compromise safety.
9. How much does it cost to repair the P0607 code on a 2010 Toyota Camry?
Repair costs can vary widely depending on the cause, ranging from $100 for minor electrical repairs to $1,000 or more for ECM replacement.
10. Can a software update resolve the P0607 code on a 2010 Toyota Camry?
Yes, in some cases, updating the ECM's software can resolve the issue if the problem is related to a software malfunction.
Discuss the causes and fixes for P0607 2010 Toyota Camry OBDII Code
Code P0607 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
