AutoCodes – Nissan – P0607 2010 Nissan Rogue

P0607 2010 Nissan Rogue Code - Control Module Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0607 2010 Nissan Rogue indicates Control Module Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,187

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0607 2010 Nissan Rogue Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This selfâˆ’check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P0607 2010 Nissan Rogue - Control Module Performance - AutoCodes.com — P0607 2010 Nissan Rogue Code - Control Module Performance

What does this mean?

What are the Possible Causes of the DTC P0607 2010 Nissan Rogue?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) Harness power supply circuit is open or shorted
Engine Control Module (ECM) Programming

How to Fix the DTC P0607 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0607 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0607 2010 Nissan Rogue code?

Need more information on how to fix the P0607 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0607 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0607 2010 Nissan Rogue Code

What does the OBDII code P0607 mean for a 2010 Nissan Rogue?

P0607 indicates a problem with the performance of the control module, suggesting that the Engine Control Module (ECM) is not functioning properly.

What are the common symptoms associated with the P0607 code?

Common symptoms include the check engine light being illuminated, poor engine performance, stalling, reduced fuel efficiency, and various electrical issues within the vehicle.

What could cause the P0607 code to appear in my Nissan Rogue?

Causes may include a faulty ECM, poor electrical connections, damaged wiring, or issues with the vehicle's sensors that affect the ECM's performance.

How can I diagnose the P0607 code in my vehicle?

To diagnose the P0607 code, start by using an OBD-II scanner to confirm the code and check for any additional codes. Inspect the wiring and connectors related to the ECM, and consider testing the ECM itself.

What are some common repair solutions for the P0607 code?

Common repairs may involve reprogramming or replacing the ECM, fixing wiring issues, or addressing any faulty sensors that affect the ECM's performance.

Can I continue to drive my 2010 Nissan Rogue with the P0607 code?

While it may be possible to drive the vehicle, it is not recommended due to the potential for poor performance and other related issues. Itâ€™s best to address the code promptly.

How much does it typically cost to repair the P0607 code?

Repair costs can vary widely, ranging from $100 to $1,500, depending on whether the issue is a simple wiring problem or a full ECM replacement.

Is the P0607 code a serious issue that needs immediate attention?

Yes, the P0607 code indicates a serious issue with the control module that can affect vehicle performance and reliability, so it should be addressed as soon as possible.

Can I reset the P0607 code and expect it to stay off?

Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code will likely reappear.

Will clearing the P0607 code affect my vehicle's performance?

Clearing the code will not improve performance if the underlying problem persists. It is important to diagnose and repair the root cause to restore proper function.