P0607 2008 Nissan Altima Sedan Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2008 Nissan Altima Sedan indicates Control Module Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2008 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0607 2008 Nissan Altima Sedan?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2008 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2008 Nissan Altima Sedan code?
Need more information on how to fix the P0607 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2008 Nissan Altima Sedan Code
1. What does the OBDII code P0607 mean for a 2008 Nissan Altima Sedan?
P0607 indicates a "Control Module Performance" issue, meaning the Engine Control Module (ECM) has detected an internal fault.
2. What are the common symptoms of a P0607 code in a 2008 Nissan Altima?
Symptoms may include poor engine performance, stalling, the check engine light turning on, and difficulty starting the vehicle.
3. What causes the P0607 code to appear in a Nissan Altima?
Common causes include a faulty ECM, software corruption, poor electrical connections, or issues with the vehicle's battery or alternator.
4. Can a weak battery cause the P0607 code?
Yes, a weak or failing battery can cause voltage irregularities that may trigger the P0607 code.
5. How do you diagnose the P0607 code in a 2008 Nissan Altima Sedan?
Diagnosis typically involves scanning for additional codes, checking the ECM's power supply and ground connections, inspecting wiring, and possibly testing the ECM itself.
6. Is it safe to drive with the P0607 code active?
Driving with a P0607 code can be risky, as it may lead to stalling or unpredictable engine behavior. Repairs should be addressed promptly.
7. Can a software update fix the P0607 code on a 2008 Nissan Altima?
Yes, in some cases, reprogramming or updating the ECM's software can resolve the issue if it’s caused by software corruption.
8. Does a P0607 code always mean the ECM needs to be replaced?
Not necessarily. It could be caused by wiring issues, bad connections, or other components affecting the ECM’s performance.
9. How much does it cost to fix a P0607 code on a 2008 Nissan Altima?
Repair costs vary depending on the cause. ECM replacement can cost $500–$1,500, while fixing wiring or connection issues may be significantly less.
10. What tools are needed to troubleshoot a P0607 code?
You’ll need an OBDII scanner, a multimeter to check electrical connections, and possibly specialized tools for ECM testing or reprogramming.
Discuss the causes and fixes for P0607 2008 Nissan Altima Sedan OBDII Code
Code P0607 2008 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
