P0607 2001 Toyota Highlander Code - Control Module Performance
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0607 2001 Toyota Highlander indicates Control Module Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0607 2001 Toyota Highlander Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0607 2001 Toyota Highlander?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0607 2001 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0607 2001 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0607 2001 Toyota Highlander code?
Need more information on how to fix the P0607 2001 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0607 2001 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0607 2001 Toyota Highlander Code
1. What does the OBDII code P0607 mean for a 2001 Toyota Highlander?
It indicates a "Control Module Performance" issue, meaning the Engine Control Module (ECM) has detected an internal malfunction.
2. What are the common symptoms of a P0607 code in a 2001 Toyota Highlander?
Symptoms include engine stalling, rough idling, hesitation during acceleration, reduced fuel efficiency, or the vehicle going into limp mode.
3. What causes the P0607 code to appear on a 2001 Toyota Highlander?
The code can be triggered by a faulty ECM, wiring issues, poor electrical connections, or voltage irregularities from the battery or alternator.
4. Can a weak battery cause the P0607 code?
Yes, a weak or failing battery can cause voltage irregularities that may trigger the P0607 code.
5. How do you diagnose the P0607 code on a 2001 Toyota Highlander?
Diagnosis involves checking the battery voltage, inspecting wiring and connections to the ECM, and testing the ECM itself for internal faults.
6. Can I drive my 2001 Toyota Highlander with the P0607 code?
While the car may still run, driving with this code is not recommended as it can lead to further engine performance issues or leave you stranded.
7. How do you fix the P0607 code on a 2001 Toyota Highlander?
Repairs may include replacing the ECM, fixing damaged wiring, cleaning corroded connectors, or addressing battery and alternator issues.
8. Is replacing the ECM the only solution for a P0607 code?
No, the issue could also be due to poor electrical connections or voltage problems, which should be ruled out before replacing the ECM.
9. How much does it typically cost to fix a P0607 code on a 2001 Toyota Highlander?
Costs vary; ECM replacement can range from $400 to $1200, while fixing wiring or connection issues may be significantly cheaper.
10. Can a P0607 code be cleared without repairs on a 2001 Toyota Highlander?
Clearing the code without addressing the underlying issue may temporarily turn off the Check Engine Light, but the problem will likely return.
Discuss the causes and fixes for P0607 2001 Toyota Highlander OBDII Code
Code P0607 2001 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
