AutoCodes – Ford – P0605 2012 Ford Fusion

P0605 2012 Ford Fusion Code - PCM Read Only Memory Error

Quick Answer

The Powertrain Control Module (PCM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. Common causes include Powertrain Control Module (PCM) programming error, Physically damaged Powertrain Control Module, Faulty Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0605 2012 Ford Fusion indicates PCM Read Only Memory Error .
Common causes: Common causes include Powertrain Control Module (PCM) programming error, Physically damaged Powertrain Control Module, Faulty Powertrain Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,459

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 30, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0605 2012 Ford Fusion Description

The Powertrain Control Module (PCM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check insures that the Powertrain Control Module is functioning properly. The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module Read Only Memory (ROM) has been corrupted.

OBDII Code P0605 2012 Ford Fusion - PCM Read Only Memory Error - AutoCodes.com — P0605 2012 Ford Fusion Code - PCM Read Only Memory Error

What does this mean?

What are the Possible Causes of the DTC P0605 2012 Ford Fusion?

Powertrain Control Module (PCM) programming error
Physically damaged Powertrain Control Module
Faulty Powertrain Control Module
Powertrain Control Module harness is open or shorted
Powertrain Control Module circuit poor electrical connection

How to Fix the DTC P0605 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Try clearing the code before replacing any parts. Reprogram the Vehicle Identification (VID) block (use as built data). Check for other Diagnostic Trouble Code (DTC) or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new Powertrain Control Module (PCM).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0605 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0605 2012 Ford Fusion code?

Need more information on how to fix the P0605 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0605 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0605 2012 Ford Fusion Code

1. What does the OBDII code P0605 on a 2012 Ford Fusion indicate?

The P0605 code indicates a PCM (Powertrain Control Module) Read Only Memory Error.

2. What are the common symptoms of a PCM Read Only Memory Error in a 2012 Ford Fusion?

Common symptoms include engine performance issues, stalling, rough idling, and difficulty starting the vehicle.

3. What are the possible causes of the P0605 code on a 2012 Ford Fusion?

Possible causes of the P0605 code include a faulty PCM, damaged wiring or connectors, software issues, or a dead car battery.

4. How can I diagnose a PCM Read Only Memory Error in my 2012 Ford Fusion?

Diagnosing a P0605 code usually involves using a diagnostic scanner to retrieve the trouble codes and performing a thorough inspection of the PCM, wiring, and connectors.

5. Can I continue driving my 2012 Ford Fusion with a P0605 code?

It is not recommended to continue driving your vehicle with a PCM Read Only Memory Error, as it can lead to further damage and potential safety hazards.

6. How can I repair a P0605 code on my 2012 Ford Fusion?

Repairing a P0605 code may involve replacing the PCM, repairing damaged wiring or connectors, updating software, or addressing any underlying issues causing the error.

7. Is it possible to reset the P0605 code on a 2012 Ford Fusion without repairing the issue?

While you can clear the trouble code with a diagnostic scanner, it is important to address the root cause of the PCM Read Only Memory Error to prevent it from recurring.

8. Can a dead car battery cause a P0605 code in a 2012 Ford Fusion?

Yes, a dead or weak car battery can sometimes trigger a P0605 code due to voltage fluctuations affecting the PCM operation.

9. How much does it typically cost to repair a P0605 code on a 2012 Ford Fusion?

The cost of repairing a P0605 code can vary depending on the underlying issue, but it may range from $200 to $800 or more, including parts and labor.

10. Are there any preventive measures to avoid a PCM Read Only Memory Error in a 2012 Ford Fusion?

To prevent a P0605 code, it is essential to perform regular vehicle maintenance, keep the car battery in good condition, and address any issues promptly to avoid PCM malfunctions.