AutoCodes – Ford – P0605 2003 Ford F150

P0605 2003 Ford F150 Code - PCM Read Only Memory Error

Quick Answer

The Powertrain Control Module (PCM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. Common causes include Powertrain Control Module (PCM) programming error, Physically damaged Powertrain Control Module, Faulty Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0605 2003 Ford F150 indicates PCM Read Only Memory Error .
Common causes: Common causes include Powertrain Control Module (PCM) programming error, Physically damaged Powertrain Control Module, Faulty Powertrain Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,790

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 30, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0605 2003 Ford F150 Description

The Powertrain Control Module (PCM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check insures that the Powertrain Control Module is functioning properly. The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module Read Only Memory (ROM) has been corrupted.

OBDII Code P0605 2003 Ford F150 - PCM Read Only Memory Error - AutoCodes.com — P0605 2003 Ford F150 Code - PCM Read Only Memory Error

What does this mean?

What are the Possible Causes of the DTC P0605 2003 Ford F150?

Powertrain Control Module (PCM) programming error
Physically damaged Powertrain Control Module
Faulty Powertrain Control Module
Powertrain Control Module harness is open or shorted
Powertrain Control Module circuit poor electrical connection

How to Fix the DTC P0605 2003 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Try clearing the code before replacing any parts. Reprogram the Vehicle Identification (VID) block (use as built data). Check for other Diagnostic Trouble Code (DTC) or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new Powertrain Control Module (PCM).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0605 2003 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0605 2003 Ford F150 code?

Need more information on how to fix the P0605 2003 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0605 2003 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0605 2003 Ford F150 Code

1. What does the OBDII code P0605 mean on a 2003 Ford F150?

P0605 indicates a "PCM Read Only Memory (ROM) Error," meaning the Powertrain Control Module (PCM) has detected an internal fault in its ROM.

2. What are the common symptoms of code P0605 on a 2003 Ford F150?

Symptoms may include engine stalling, failure to start, reduced fuel efficiency, erratic engine performance, or an illuminated Check Engine Light.

3. What causes the P0605 code on a 2003 Ford F150?

Common causes include a faulty PCM, corrupted PCM software, electrical issues like poor wiring or loose connections, or water damage to the PCM.

4. Can a bad battery cause the P0605 code?

Yes, a weak or failing battery can cause voltage fluctuations that may disrupt the PCM and trigger the P0605 code.

5. How do you diagnose a P0605 code on a 2003 Ford F150?

Start by checking the battery voltage, inspecting the wiring and connections to the PCM, and using a scan tool to verify the code. If these checks are normal, the PCM may need further testing.

6. Can the P0605 code be caused by a software issue?

Yes, outdated or corrupted PCM software can trigger the P0605 code. Reflashing or updating the PCM software may resolve the issue.

7. Is replacing the PCM the only solution for the P0605 code?

Not always. Before replacing the PCM, ensure all connections, wiring, and grounds are intact, and consider reflashing the PCM software if applicable.

8. How much does it cost to repair a P0605 code on a 2003 Ford F150?

Repair costs vary. PCM reprogramming can cost $100â€“$200, while replacing the PCM may cost $500â€“$1,200, including parts and labor.

9. Can I drive my 2003 Ford F150 with the P0605 code?

Driving with a P0605 code is not recommended, as it can lead to erratic engine behavior, stalling, or even complete engine failure.

10. How do I prevent the P0605 code from recurring?

Regularly inspect and maintain your vehicle's electrical system, avoid exposing the PCM to moisture, and ensure the battery and alternator are functioning properly.