AutoCodes – Cadillac – P0604 Cadillac

P0604 Cadillac Code - Control Module Random Access Memory Performance

Quick Answer

This diagnostic applies to internal microprocessor integrity conditions within the Engine Control Module (ECM). Common causes include Low battery voltage, Reprogram Engine Control Module (ECM), Faulty Engine Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0604 Cadillac indicates Control Module Random Access Memory Performance.
Common causes: Common causes include Low battery voltage, Reprogram Engine Control Module (ECM), Faulty Engine Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,511

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0604 Cadillac Description

This diagnostic applies to internal microprocessor integrity conditions within the Engine Control Module (ECM). This diagnostic also addresses if the ECM is not programmed. The ECM monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. The Diagnostic Trouble Code (DTC) will be set when the ECM detects an internal failure or incomplete programming for more than 10 s.

OBDII Code P0604 Cadillac - Control Module Random Access Memory Performance - AutoCodes.com — P0604 Cadillac Code - Control Module Random Access Memory Performance

What does this mean?

What are the Possible Causes of the DTC P0604 Cadillac?

Low battery voltage
Reprogram Engine Control Module (ECM)
Faulty Engine Control Module
Engine Control Module harness is open or shorted
Engine Control Module circuit poor electrical connection

How to Fix the DTC P0604 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the Powertrain Control Module (PCM) fuse, if the fuse is OK, then try erasing the code first and if the code comes back you may have to reprogram or replace the PCM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0604 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0604 Cadillac code?

Need more information on how to fix the P0604 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0604 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.