P0603 2011 Nissan Altima Sedan Code - Engine Control Module Power Supply Circuit
Quick Answer
Battery voltage is supplied to the Engine Control Module (ECM) even when the ignition switch is turned OFF for the ECM memory function of the DTC memory, the air-fuel ratio feedback compensation value memory, the idle air volume learning value memory, etc. Common causes include Loose or poor battery terminal connection, Low battery charge, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0603 2011 Nissan Altima Sedan indicates Engine Control Module Power Supply Circuit.
- Common causes
- Common causes include Loose or poor battery terminal connection, Low battery charge, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0603 2011 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0603 2011 Nissan Altima Sedan?
- Loose or poor battery terminal connection
- Low battery charge
- Faulty Engine Control Module (ECM)
- ECM power supply circuit is open or shorted
- ECM Outdated Program
How to Fix the DTC P0603 2011 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0603 2011 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0603 2011 Nissan Altima Sedan code?
Need more information on how to fix the P0603 2011 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0603 2011 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0603 2011 Nissan Altima Sedan Code
1. What does the OBDII code P0603 mean for a 2011 Nissan Altima Sedan?
P0603 indicates an issue with the Engine Control Module (ECM) Power Supply Circuit, often related to memory or voltage problems within the ECM.
2. What are the common symptoms of code P0603 in a 2011 Nissan Altima?
Symptoms may include a check engine light, poor engine performance, difficulty starting, or erratic electrical behavior.
3. What causes the P0603 code to appear on a 2011 Nissan Altima?
Common causes include a weak or disconnected battery, faulty ECM, wiring issues, or aftermarket tuning/programming.
4. Can a weak battery trigger a P0603 code in a Nissan Altima?
Yes, a weak or failing battery can cause voltage interruptions that trigger the P0603 code.
5. Is it safe to drive a 2011 Nissan Altima with a P0603 code?
While it might still be drivable, the code can lead to further electrical or performance issues if not addressed promptly.
6. How do you diagnose the P0603 code in a 2011 Nissan Altima?
Diagnosis includes checking battery voltage, inspecting ECM wiring and connections, and testing the ECM for faults or memory errors.
7. Can resetting the ECM clear the P0603 code on a Nissan Altima?
Resetting the ECM may temporarily clear the code, but the underlying issue needs to be resolved to prevent it from returning.
8. How much does it typically cost to fix the P0603 code in a 2011 Nissan Altima?
Repair costs vary, ranging from $100 for minor wiring repairs to over $1,000 if the ECM requires replacement.
9. Can aftermarket tuning cause the P0603 code to appear?
Yes, improper tuning or programming of the ECM can disrupt its memory and trigger the P0603 code.
10. What should I check first when troubleshooting the P0603 code on a 2011 Nissan Altima?
Start by checking the battery and its connections, followed by inspecting the ECM wiring and ensuring there are no loose or damaged connections.
Discuss the causes and fixes for P0603 2011 Nissan Altima Sedan OBDII Code
-
I was getting a sayiny there was not enough power to car, because of loose battery cable, fixed those and now getting p603 code. Please help
-
Have your tried clearing the code? You probably got the P0603 because of the loose wire.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
