AutoCodes – Toyota – P0601 Toyota

P0601 Toyota Code - Control Module Performance

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0601 Toyota indicates Control Module Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,333

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 29, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0601 Toyota Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.

OBDII Code P0601 Toyota - Control Module Performance - AutoCodes.com — P0601 Toyota Code - Control Module Performance

What does this mean?

What are the Possible Causes of the DTC P0601 Toyota?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) Harness power supply circuit is open or shorted
Engine Control Module (ECM) Programming

How to Fix the DTC P0601 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the Engine Control Module (ECM) fuse, if the fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replace the ECM.

There is a factory service bulletin for the following Toyota models:
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2005 Toyota Matrix
2006 Toyota Matrix
2007 Toyota Matrix
2005-2007 Toyota Corolla, Matrix Factory Service Bulletin OBDII Code P0601

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0601 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0601 Toyota code?

Need more information on how to fix the P0601 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0601 Toyota code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.