P0600 Chrysler Code - Powertrain Control Module Fault
Quick Answer
The Powertrain Control Module (PCM) sets the Diagnostic Trouble Code (DTC) when is unable to communicate with other control modules through the Serial Communication Link. Common causes include Low battery voltage, Faulty Powertrain Control Module (PCM), Powertrain Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0600 Chrysler indicates Powertrain Control Module Fault.
- Common causes
- Common causes include Low battery voltage, Faulty Powertrain Control Module (PCM), Powertrain Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0600 Chrysler Description
What are the Possible Causes of the DTC P0600 Chrysler?
- Low battery voltage
- Faulty Powertrain Control Module (PCM)
- Powertrain Control Module harness is open or shorted
- Powertrain Control Module circuit poor electrical connection
How to Fix the DTC P0600 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0600 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0600 Chrysler code?
Need more information on how to fix the P0600 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0600 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0600 Chrysler Code
No Frequently Asked Questions about P0600 Chrysler Code found.
Discuss the causes and fixes for P0600 Chrysler OBDII Code
-
Due to the dead battery, the Engine control Module (ECM) failed to communicate with one or more control modules (e.g. ABS module, transmission module). The first thing you need to do is make sure the battery is fully charged, and then clear the code with an OBDII code reader or disconnect the car battery for about 10 minutes.
If the problem persist, then you need to check all the other control modules for codes.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
