P0600 2011 Ford Fusion Code - Loss of Serial Communication Link
Quick Answer
Indicates an error occurred in the Powertrain Control Module (PCM). Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module harness is open or shorted, Powertrain Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0600 2011 Ford Fusion indicates Loss of Serial Communication Link.
- Common causes
- Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module harness is open or shorted, Powertrain Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0600 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0600 2011 Ford Fusion?
- Faulty Powertrain Control Module (PCM)
- Powertrain Control Module harness is open or shorted
- Powertrain Control Module circuit poor electrical connection
- Low battery voltage
How to Fix the DTC P0600 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0600 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0600 2011 Ford Fusion code?
Need more information on how to fix the P0600 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0600 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0600 2011 Ford Fusion Code
What does the OBDII code P0600 mean for a 2011 Ford Fusion?
P0600 indicates a "Loss of Serial Communication Link," meaning the vehicle's control modules are unable to communicate properly.
What are common symptoms of code P0600 in a 2011 Ford Fusion?
Symptoms may include engine stalling, poor performance, erratic transmission behavior, or dashboard warning lights like the check engine light.
What causes the P0600 code in a 2011 Ford Fusion?
Common causes include faulty wiring or connectors, damaged control modules, or issues with the CAN (Controller Area Network) bus system.
Can a bad battery cause the P0600 code in a 2011 Ford Fusion?
Yes, a weak or failing battery can disrupt voltage and communication signals, potentially triggering the P0600 code.
Is it safe to drive a 2011 Ford Fusion with the P0600 code?
Driving with P0600 is not recommended as it can lead to unpredictable vehicle behavior and potential safety risks.
How can the P0600 code be diagnosed in a 2011 Ford Fusion?
Diagnosis involves checking wiring, connectors, and communication lines between the control modules, as well as scanning for other related codes.
What modules are typically involved in the P0600 code for a 2011 Ford Fusion?
The issue may involve modules like the PCM (Powertrain Control Module), TCM (Transmission Control Module), or ABS (Anti-lock Brake System).
Can a faulty PCM cause the P0600 code in a 2011 Ford Fusion?
Yes, a malfunctioning PCM may fail to communicate with other modules, triggering the P0600 code.
How is the P0600 code resolved on a 2011 Ford Fusion?
Repairs may include fixing damaged wiring, replacing faulty connectors, or reprogramming/replacing defective control modules.
Will clearing the P0600 code fix the issue on a 2011 Ford Fusion?
Clearing the code may temporarily remove it, but the underlying communication problem must be addressed to prevent recurrence.
Discuss the causes and fixes for P0600 2011 Ford Fusion OBDII Code
Code P0600 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
