AutoCodes – Buick – P0573 Buick

P0573 Buick Code - Brake Switch Circuit High Voltage

Quick Answer

The Brake Pedal Position Sensor signal circuit is a B+ input from the Body Control Module (BCM) to the Engine Control Module (ECM). Common causes include Faulty Brake Pedal Position Sensor, Misadjusted Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0573 Buick indicates Brake Switch Circuit High Voltage.
Common causes
Common causes include Faulty Brake Pedal Position Sensor, Misadjusted Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 401
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 14, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0573 Buick Description

The Brake Pedal Position Sensor signal circuit is a B+ input from the Body Control Module (BCM) to the Engine Control Module (ECM). The BCM and ECM monitor the Brake Pedal Position Sensor signal circuit to detect when the brake pedal has been applied. When the brake pedal is applied, the BCM supplies B+ on the stop lamp signal circuit and also sends a serial data message to the ECM indicating that the brake pedal has been applied. This Diagnostic Trouble Code (DTC) will be set when the ECM detects a short to voltage on the discrete brake signal circuit when the serial data message from the BCM indicates the brakes are not applied. This diagnostic will run when the serial data message and the voltage signal on the brake switch signal circuit do not match for 8 out 10 times, and the condition is present for greater than 2 s.
OBDII Code P0573 Buick - Brake Switch Circuit High Voltage - AutoCodes.com
P0573 Buick Code - Brake Switch Circuit High Voltage

What are the Possible Causes of the DTC P0573 Buick?

  • Faulty Brake Pedal Position Sensor
  • Misadjusted Brake Pedal Position Sensor
  • Brake Pedal Position Sensor harness is open or shorted
  • Brake Pedal Position Sensor circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How to Fix the DTC P0573 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0573 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0573 Buick code?

Need more information on how to fix the P0573 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0573 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0573 Buick Code

1. What does the OBDII code P0573 mean on a Buick?

P0573 indicates a "Brake Switch Circuit High Voltage" issue, meaning the powertrain control module (PCM) has detected a higher-than-normal voltage in the brake switch circuit.

2. What are the common symptoms of code P0573 in a Buick?

Symptoms may include the brake lights not functioning properly, cruise control being inoperative, and a potential check engine light or ABS warning light.

3. What causes the P0573 code on a Buick?

Common causes include a faulty brake light switch, damaged or corroded wiring, a poor electrical connection, or a blown fuse in the brake light circuit.

4. Can I drive my Buick with the P0573 code?

While the car may still be drivable, it's not recommended, as malfunctioning brake lights and cruise control can create safety hazards.

5. How do I diagnose the P0573 code on a Buick?

Start by inspecting the brake light switch, wiring, and connectors for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.

6. How do I fix the P0573 code on my Buick?

Repairs may include replacing a faulty brake light switch, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing a blown fuse.

7. What tools are needed to fix the P0573 code in a Buick?

You may need a multimeter, a scan tool or OBDII code reader, and basic hand tools to access and repair the brake light switch or wiring.

8. How much does it cost to fix the P0573 code on a Buick?

Repair costs can vary but typically range from $50 to $200, depending on whether the issue is with the brake light switch, wiring, or connectors.

9. Can a bad brake light bulb cause the P0573 code in a Buick?

A bad bulb is unlikely to trigger this code, as it specifically relates to high voltage in the brake switch circuit, not the bulbs themselves.

10. Will clearing the P0573 code fix the problem?

Clearing the code may temporarily turn off the check engine light, but the issue will return unless the underlying problem is properly addressed.

Discuss the causes and fixes for P0573 Buick OBDII Code

Code P0573 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play