AutoCodesFord – P0573 2010 Ford Fusion

P0573 2010 Ford Fusion Code - Brake Switch 'A' Circuit High

Quick Answer

When the brake pedal is depressed, the stop light switch sends a signal to the Engine Control Module (ECM). Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0573 2010 Ford Fusion indicates Brake Switch 'A' Circuit High.
Common causes
Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,624
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 28, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0573 2010 Ford Fusion Description

When the brake pedal is depressed, the stop light switch sends a signal to the Engine Control Module (ECM). When the ECM receives this signal, it cancels the cruise control.
OBDII Code P0573 2010 Ford Fusion - Brake Switch 'A' Circuit High - AutoCodes.com
P0573 2010 Ford Fusion Code - Brake Switch 'A' Circuit High

What are the Possible Causes of the DTC P0573 2010 Ford Fusion?

  • Faulty Brake Switch
  • Brake Switch harness is open or shorted
  • Brake Switch circuit poor electrical connection

How to Fix the DTC P0573 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0573 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0573 2010 Ford Fusion code?

Need more information on how to fix the P0573 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0573 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0573 2010 Ford Fusion Code

1. What does the OBDII code P0573 mean on a 2010 Ford Fusion?

P0573 indicates a "Brake Switch 'A' Circuit High" fault, meaning the brake light switch is sending a voltage signal that is higher than expected.

2. What are the common symptoms of code P0573 in a 2010 Ford Fusion?

Symptoms include malfunctioning brake lights, cruise control not working, and potentially an illuminated check engine light.

3. What causes the P0573 code to appear?

Common causes include a faulty brake light switch, damaged or corroded wiring, a stuck brake pedal, or a defective connector.

4. Can I drive my 2010 Ford Fusion with the P0573 code?

While the car may be drivable, the issue can affect brake light functionality and cruise control, posing a safety risk. It’s best to address it promptly.

5. How do I diagnose the P0573 code on my Ford Fusion?

Start by inspecting the brake light switch, wiring, and connectors for damage or corrosion. A multimeter can be used to test for proper voltage at the switch.

6. How do I fix the P0573 code on a 2010 Ford Fusion?

Repairs may include replacing the brake light switch, repairing damaged wiring, cleaning corroded connections, or resetting the code after repairs.

7. Where is the brake light switch located on a 2010 Ford Fusion?

The brake light switch is typically located near the brake pedal assembly, mounted to detect the pedal's position.

8. What tools are needed to fix the P0573 code?

Common tools include a multimeter, basic hand tools for removing and replacing the switch, and possibly a scan tool to clear the code.

9. How much does it cost to repair a P0573 code on a 2010 Ford Fusion?

Repair costs vary but replacing a brake light switch typically costs $50-$150, including parts and labor.

10. Can a faulty brake light switch affect cruise control operation?

Yes, a faulty brake light switch can disable the cruise control, as the system relies on the switch to detect when the brakes are applied.

Discuss the causes and fixes for P0573 2010 Ford Fusion OBDII Code

Code P0573 2010 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play