AutoCodes – Chevrolet – P0563 2018 Chevrolet Silverado

P0563 2018 Chevrolet Silverado Code - System Voltage High

Quick Answer

The Powertrain Control Module (PCM) continuously monitors the system voltage. Common causes include Battery defective, Loose or missing alternator drive belt, Faulty alternator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0563 2018 Chevrolet Silverado indicates System Voltage High.
Common causes: Common causes include Battery defective, Loose or missing alternator drive belt, Faulty alternator.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 353

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 04, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0563 2018 Chevrolet Silverado Description

The Powertrain Control Module (PCM) continuously monitors the system voltage. The system voltage information is taken from the PCM's ignition feed circuits. Voltages below 8.0 volts or above 17.1 volts cause improper system operation and/or component damage. If the system voltage is low the PCM raises the idle speed in order to increase the generator output. The PCM disables most outputs to protect the hardware if the system voltage is high. A scan tool may not display data if system voltage is outside this range. The Diagnostic Trouble Code (DTC) will be set if the PCM detects that the electrical system voltage level is too high.

OBDII Code P0563 2018 Chevrolet Silverado - System Voltage High - AutoCodes.com — P0563 2018 Chevrolet Silverado Code - System Voltage High

What does this mean?

What are the Possible Causes of the DTC P0563 2018 Chevrolet Silverado?

Battery defective
Loose or missing alternator drive belt
Faulty alternator
Open or short system voltage circuit

How to Fix the DTC P0563 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Higher than expected voltage problems are most likely caused by bad voltage regulator. The voltage regulator is part of the alternator.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0563 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0563 2018 Chevrolet Silverado code?

Need more information on how to fix the P0563 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0563 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0563 2018 Chevrolet Silverado Code

1. What does the OBDII code P0563 mean on a 2018 Chevrolet Silverado?

P0563 indicates the "System Voltage High" fault, meaning the vehicle's electrical system voltage is exceeding the normal operating range, typically above 16 volts.

2. What are the common symptoms of code P0563 in a 2018 Chevrolet Silverado?

Symptoms may include flickering or dimming lights, erratic instrument cluster behavior, difficulty starting, or unusual electrical issues.

3. What causes the P0563 code to appear in a 2018 Chevrolet Silverado?

Common causes include a faulty alternator, malfunctioning voltage regulator, loose or corroded battery connections, or a damaged battery.

4. Can driving with a P0563 code damage my 2018 Chevrolet Silverado?

Yes, driving with high system voltage can damage electrical components, such as the battery, ECU, or other sensitive electronics.

5. How do I diagnose the P0563 code in my 2018 Chevrolet Silverado?

Start by checking the battery voltage with a multimeter, inspect the alternator and voltage regulator, and look for loose or corroded battery terminals or wiring.

6. How can I fix the P0563 code on a 2018 Chevrolet Silverado?

Repairs may include replacing a faulty alternator or voltage regulator, cleaning or tightening battery connections, or replacing a damaged battery.

7. Could a bad ground connection cause the P0563 code in my 2018 Chevrolet Silverado?

Yes, a poor ground connection can disrupt proper voltage regulation and lead to high system voltage.

8. Is the alternator the most likely cause of a P0563 code on a 2018 Chevrolet Silverado?

While not always the case, a failing alternator or its built-in voltage regulator is a common cause of the P0563 code.

9. What tools are needed to diagnose and repair a P0563 code on a 2018 Chevrolet Silverado?

You'll need a multimeter to measure voltage, an OBDII scanner to clear the code, and basic tools for inspecting and replacing components.

10. How much does it cost to fix the P0563 code on a 2018 Chevrolet Silverado?

Repair costs vary depending on the issue; replacing an alternator can cost $400-$800, while simpler fixes like cleaning battery terminals may cost very little.