AutoCodes – Chevrolet – P0563 2015 Chevrolet Silverado

P0563 2015 Chevrolet Silverado Code - System Voltage High

Quick Answer

The Powertrain Control Module (PCM) continuously monitors the system voltage. Common causes include Battery defective, Loose or missing alternator drive belt, Faulty alternator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0563 2015 Chevrolet Silverado indicates System Voltage High.
Common causes: Common causes include Battery defective, Loose or missing alternator drive belt, Faulty alternator.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 325

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 04, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0563 2015 Chevrolet Silverado Description

The Powertrain Control Module (PCM) continuously monitors the system voltage. The system voltage information is taken from the PCM's ignition feed circuits. Voltages below 8.0 volts or above 17.1 volts cause improper system operation and/or component damage. If the system voltage is low the PCM raises the idle speed in order to increase the generator output. The PCM disables most outputs to protect the hardware if the system voltage is high. A scan tool may not display data if system voltage is outside this range. The Diagnostic Trouble Code (DTC) will be set if the PCM detects that the electrical system voltage level is too high.

OBDII Code P0563 2015 Chevrolet Silverado - System Voltage High - AutoCodes.com — P0563 2015 Chevrolet Silverado Code - System Voltage High

What does this mean?

What are the Possible Causes of the DTC P0563 2015 Chevrolet Silverado?

Battery defective
Loose or missing alternator drive belt
Faulty alternator
Open or short system voltage circuit

How to Fix the DTC P0563 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Higher than expected voltage problems are most likely caused by bad voltage regulator. The voltage regulator is part of the alternator.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0563 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0563 2015 Chevrolet Silverado code?

Need more information on how to fix the P0563 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0563 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0563 2015 Chevrolet Silverado Code

1. What does the OBDII code P0563 mean on a 2015 Chevrolet Silverado?

P0563 indicates that the Engine Control Module (ECM) has detected a system voltage that is higher than the normal operating range.

2. What are the common symptoms of the P0563 code in a 2015 Chevy Silverado?

Symptoms may include a check engine light, flickering or dimming lights, erratic dashboard behavior, battery overheating, or difficulty starting the vehicle.

3. What causes the P0563 code to appear in a 2015 Chevrolet Silverado?

Common causes include a faulty alternator voltage regulator, loose or corroded battery terminals, damaged wiring or connectors, or an overcharged battery.

4. Can a bad alternator cause the P0563 code in a 2015 Silverado?

Yes, a malfunctioning alternator, particularly a faulty voltage regulator, is a common cause of the P0563 code.

5. How do I diagnose the P0563 code on a 2015 Chevy Silverado?

Start by checking the battery voltage with a multimeter, inspecting the alternator, and examining the battery terminals and wiring for corrosion or damage.

6. Can I drive my 2015 Silverado with a P0563 code?

It is not recommended to drive with this code, as high voltage can damage electrical components and may cause the vehicle to operate erratically.

7. How do I fix the P0563 code on a 2015 Chevrolet Silverado?

Repairs may involve replacing the alternator, repairing damaged wiring, cleaning battery terminals, or replacing a faulty battery.

8. How much does it cost to fix a P0563 code on a 2015 Silverado?

Repairs can cost anywhere from $100 to $700 depending on whether the issue is with the alternator, battery, or wiring.

9. Can a weak battery trigger the P0563 code in a 2015 Chevrolet Silverado?

No, a weak battery usually causes low voltage, not high voltage. However, a malfunctioning charging system can lead to overcharging and trigger P0563.

10. Will clearing the P0563 code solve the problem in my 2015 Silverado?

Clearing the code without addressing the root cause will not fix the issue. The code will likely return until the underlying problem is resolved.