AutoCodes – Honda – P0563 2009 Honda Accord

P0563 2009 Honda Accord Code - System Voltage High

Quick Answer

The battery supplies electricity to the Engine Control Module (ECM) even when the ignition switch is OFF. Common causes include Battery defective, Loose or missing alternator drive belt, Faulty alternator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0563 2009 Honda Accord indicates System Voltage High.
Common causes: Common causes include Battery defective, Loose or missing alternator drive belt, Faulty alternator.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,784

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0563 2009 Honda Accord Description

The battery supplies electricity to the Engine Control Module (ECM) even when the ignition switch is OFF. This electricity allows the ECM to store data such as Diagnostic Trouble Code (DTC) history, freeze frame data, fuel trim values and other data. If the battery voltage falls below a minimum level, the ECM will conclude that there is a fault in the power supply circuit. The next time the engine starts, the ECM will turn on the Malfunction Indicator Light (MIL) and a DTC will be set.

OBDII Code P0563 2009 Honda Accord - System Voltage High - AutoCodes.com — P0563 2009 Honda Accord Code - System Voltage High

What does this mean?

What are the Possible Causes of the DTC P0563 2009 Honda Accord?

Battery defective
Loose or missing alternator drive belt
Faulty alternator
Open or short system voltage circuit

How to Fix the DTC P0563 2009 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Higher than expected voltage problems are most likely caused by bad voltage regulator. The voltage regulator is part of the alternator.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0563 2009 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0563 2009 Honda Accord code?

Need more information on how to fix the P0563 2009 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0563 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0563 2009 Honda Accord Code

1. What does the OBDII code P0563 on a 2009 Honda Accord indicate?

- The code P0563 in a 2009 Honda Accord points to a "System Voltage High" issue.

2. What are the common symptoms of OBDII code P0563 in a 2009 Honda Accord?

- Common symptoms include the battery warning light illuminated on the dashboard, dimming or flickering interior lights, and potential issues with starting the vehicle.

3. What are the possible causes of the OBDII code P0563 in a 2009 Honda Accord?

- The code P0563 can be triggered by a faulty alternator, a malfunctioning voltage regulator, a damaged battery, loose or corroded battery connections, or a short circuit in the electrical system.

4. How can I diagnose the OBDII code P0563 in my 2009 Honda Accord?

- Diagnosing the code may involve testing the battery voltage, checking the alternator output, inspecting the battery terminals, and examining the wiring for any signs of damage or corrosion.

5. What are some repair tips for addressing OBDII code P0563 in a 2009 Honda Accord?

- Repairing the issue may involve replacing a faulty alternator or voltage regulator, cleaning or tightening battery connections, replacing the battery if needed, and repairing any damaged wiring.

6. Can driving with the OBDII code P0563 in a 2009 Honda Accord cause further damage?

- Continuing to drive with the code P0563 may lead to further electrical issues, potential stalling of the vehicle, and damage to other electrical components.

7. How much does it typically cost to fix the OBDII code P0563 in a 2009 Honda Accord?

- The cost of repairs can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Is it safe to drive my 2009 Honda Accord with the OBDII code P0563?

- It is not recommended to drive the vehicle with the code P0563 as it can lead to potential electrical failures and safety hazards while on the road.

9. Can I reset the OBDII code P0563 in my 2009 Honda Accord on my own?

- While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.

10. How long does it take to fix the OBDII code P0563 in a 2009 Honda Accord?

- The repair time can vary based on the specific cause of the issue and the availability of parts, but it may take a few hours to a full day to complete the necessary repairs.