AutoCodesMitsubishi – P0562 Mitsubishi

P0562 Mitsubishi Code - Battery Low Voltage

Quick Answer

The battery supplies electricity to the Engine Control Module (ECM) even when the ignition switch is OFF. Common causes include Low battery charge, Battery defective, Loose or missing alternator drive belt. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0562 Mitsubishi indicates Battery Low Voltage.
Common causes
Common causes include Low battery charge, Battery defective, Loose or missing alternator drive belt.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,831
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0562 Mitsubishi Description

The battery supplies electricity to the Engine Control Module (ECM) even when the ignition switch is OFF. This electricity allows the ECM to store data such as Diagnostic Trouble Code (DTC) history, freeze frame data, fuel trim values and other data. If the battery voltage falls below a minimum level, the ECM will conclude that there is a fault in the power supply circuit. The next time the engine starts, the ECM will turn on the Malfunction Indicator Light (MIL) and a DTC will be set.
OBDII Code P0562 Mitsubishi - Battery Low Voltage - AutoCodes.com
P0562 Mitsubishi Code - Battery Low Voltage

What are the Possible Causes of the DTC P0562 Mitsubishi?

  • Low battery charge
  • Battery defective
  • Loose or missing alternator drive belt
  • Faulty alternator
  • Open or short system voltage circuit

How to Fix the DTC P0562 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0562 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0562 Mitsubishi code?

Need more information on how to fix the P0562 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0562 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0562 Mitsubishi Code

1. What does the OBDII code P0562 mean for a Mitsubishi?

P0562 indicates "Battery Low Voltage," meaning the vehicle's electrical system is receiving insufficient voltage from the battery or charging system.

2. What are common symptoms of the P0562 code in a Mitsubishi?

Symptoms include dim headlights, difficulty starting the engine, stalling, warning lights on the dashboard, and erratic electrical system behavior.

3. What causes the P0562 code on a Mitsubishi?

Common causes include a failing alternator, weak or discharged battery, loose or corroded battery connections, or damaged wiring in the charging system.

4. Can I drive my Mitsubishi with the P0562 code active?

Driving with P0562 is not recommended as it can lead to a dead battery, engine stalling, or other electrical failures that may leave you stranded.

5. How do I diagnose the P0562 code in a Mitsubishi?

Start by checking battery voltage, inspecting battery terminals for corrosion, testing the alternator output, and looking for damaged wiring or loose connections in the charging system.

6. How do I fix the P0562 code on a Mitsubishi?

Possible fixes include replacing a failing alternator, installing a new battery, cleaning or tightening battery terminals, or repairing damaged wiring.

7. How much does it cost to repair a P0562 code on a Mitsubishi?

Costs vary depending on the issue, ranging from $10 for terminal cleaning to $300-$800 for alternator replacement or other major repairs.

8. Can a bad alternator trigger the P0562 code on a Mitsubishi?

Yes, a failing alternator is a common cause of insufficient charging voltage, which triggers the P0562 code.

9. Will clearing the P0562 code fix the issue on my Mitsubishi?

Clearing the code will erase it temporarily but won’t address the underlying problem. Proper diagnosis and repair are necessary to prevent recurrence.

10. How can I prevent the P0562 code from appearing on my Mitsubishi?

Regularly inspect and maintain the battery, alternator, and electrical connections to ensure the charging system operates correctly.

Discuss the causes and fixes for P0562 Mitsubishi OBDII Code

Code P0562 Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play