AutoCodes – Audi – P0560 Audi

P0560 Audi Code - System Voltage Malfunction

Quick Answer

The battery supplies electricity to the Engine Control Module (ECM) even when the ignition switch is OFF. Common causes include Low battery charge, Battery defective, Loose or missing alternator drive belt. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0560 Audi indicates System Voltage Malfunction.
Common causes: Common causes include Low battery charge, Battery defective, Loose or missing alternator drive belt.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,270

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0560 Audi Description

The battery supplies electricity to the Engine Control Module (ECM) even when the ignition switch is OFF. This electricity allows the ECM to store data such as Diagnostic Trouble Code (DTC) history, freeze frame data, fuel trim values and other data. If the battery voltage falls below a minimum level, the ECM will conclude that there is a fault in the power supply circuit. The next time the engine starts, the ECM will turn on the Malfunction Indicator Light (MIL) and a DTC will be set.

OBDII Code P0560 Audi - System Voltage Malfunction - AutoCodes.com — P0560 Audi Code - System Voltage Malfunction

What does this mean?

What are the Possible Causes of the DTC P0560 Audi?

Low battery charge
Battery defective
Loose or missing alternator drive belt
Faulty alternator
Open or short system voltage circuit

How to Fix the DTC P0560 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Start by recharging or replacing the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0560 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0560 Audi code?

Need more information on how to fix the P0560 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0560 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0560 Audi Code

1. What are the common symptoms of OBDII code P0560 in an Audi?

- Common symptoms include dimming or flickering lights, erratic gauge readings, difficulty starting the vehicle, and potential stalling.

2. What are the possible causes of a System Voltage Malfunction (P0560) in an Audi?

- Causes may include a faulty alternator, battery issues, loose or corroded battery terminals, damaged wiring, or a malfunctioning voltage regulator.

3. How can I diagnose the source of a System Voltage Malfunction in my Audi?

- A thorough inspection of the battery, alternator, and related wiring is necessary. Testing the battery voltage, checking the alternator output, and inspecting connections for corrosion can help pinpoint the issue.

4. Can driving with an OBDII code P0560 cause further damage to my Audi?

- Continuing to drive with a System Voltage Malfunction can lead to electrical component damage, potential stalling, or complete loss of power while driving.

5. Is it safe to reset the OBDII code P0560 in my Audi without addressing the underlying issue?

- Resetting the code without fixing the root cause will likely result in the code reappearing, as the underlying problem has not been resolved.

6. What are some repair tips for fixing OBDII code P0560 in an Audi?

- Ensure the battery is fully charged and in good condition, check and repair any loose or corroded connections, test the alternator output, and inspect the voltage regulator for proper functioning.

7. Can a DIY enthusiast fix OBDII code P0560 in an Audi, or is professional help necessary?

- Depending on the underlying issue, a DIY enthusiast with knowledge of automotive electrical systems may be able to address the problem. However, professional help is recommended for complex electrical repairs.

8. Will a low battery voltage trigger OBDII code P0560 in an Audi?

- Yes, a low battery voltage can trigger the System Voltage Malfunction code, as the vehicle's electrical system requires a stable voltage to operate properly.

9. How important is it to address OBDII code P0560 promptly in an Audi?

- It is crucial to address the System Voltage Malfunction code promptly to prevent potential electrical system damage, stalling, or safety hazards while driving.

10. Are there any preventive maintenance measures to avoid OBDII code P0560 in an Audi?

- Regularly checking the battery's condition, ensuring proper charging system operation, and addressing any electrical issues promptly can help prevent the occurrence of code P0560.