AutoCodes – KIA – P0552 KIA

P0552 KIA Code - Power Steering Pressure Sensor Circuit Low Input

Quick Answer

Power steering pressure (PSP) sensor is installed to the power steering high-pressure tube and detects a power steering load. Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0552 KIA indicates Power Steering Pressure Sensor Circuit Low Input.
Common causes
Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,968
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0552 KIA Description

Power steering pressure (PSP) sensor is installed to the power steering high-pressure tube and detects a power steering load. This sensor is a potentiometer which transforms the power steering load into output voltage, and emits the voltage signal to the Engine Control Module (ECM). The ECM controls the electric throttle control actuator and adjusts the throttle valve opening angle to increase the engine speed and adjusts the idle speed for the increased load.
OBDII Code P0552 KIA - Power Steering Pressure Sensor Circuit Low Input - AutoCodes.com
P0552 KIA Code - Power Steering Pressure Sensor Circuit Low Input

What are the Possible Causes of the DTC P0552 KIA?

  • Faulty Power Steering Pressure Sensor
  • Power Steering Pressure Sensor harness is open or shorted
  • Power Steering Pressure Sensor circuit poor electrical connection

How to Fix the DTC P0552 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0552 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0552 KIA code?

Need more information on how to fix the P0552 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0552 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0552 KIA Code

1. What does the OBDII code P0552 mean on a Kia?

P0552 indicates a low input signal from the power steering pressure sensor circuit, suggesting an issue with the sensor or its circuit.

2. What are the common symptoms of code P0552 on a Kia?

Symptoms may include reduced power steering performance, increased steering effort, illuminated Check Engine Light, and poor fuel efficiency.

3. What causes the P0552 code on a Kia?

Common causes include a faulty power steering pressure sensor, damaged wiring or connectors, low power steering fluid, or an issue with the power steering pump.

4. Can I drive my Kia with the P0552 code?

While driving may still be possible, it could be unsafe due to harder steering, especially at low speeds. Addressing the issue promptly is recommended.

5. How do I diagnose the P0552 code on a Kia?

Start by checking the power steering fluid level, inspecting the wiring and connectors for damage, and testing the power steering pressure sensor with a multimeter.

6. How do I fix the P0552 code on a Kia?

Repairs may include replacing a faulty power steering pressure sensor, repairing or replacing damaged wiring, or topping up power steering fluid if it's low.

7. How much does it cost to fix the P0552 code on a Kia?

Repair costs vary but typically range from $100 to $300, depending on whether the issue is with the sensor, wiring, or other related components.

8. Can low power steering fluid cause the P0552 code on a Kia?

Yes, low power steering fluid can cause abnormal pressure readings, potentially triggering the P0552 code.

9. Where is the power steering pressure sensor located on a Kia?

The power steering pressure sensor is typically located on the power steering pump or the high-pressure line in the steering system.

10. Will clearing the P0552 code with a scanner fix the problem?

Clearing the code may temporarily turn off the Check Engine Light, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P0552 KIA OBDII Code

Code P0552 KIA comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play