AutoCodes – GMC – P0546 2014 GMC Sierra

P0546 2014 GMC Sierra Code - Exhaust Gas Temperature Sensor 1 Circuit High Voltage

Quick Answer

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 1, Exhaust Gas Temperature Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0546 2014 GMC Sierra indicates Exhaust Gas Temperature Sensor 1 Circuit High Voltage.
Common causes: Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 1, Exhaust Gas Temperature Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 275

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 03, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0546 2014 GMC Sierra Description

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Exhaust temperature sensor 1 is the first exhaust temperature sensor in the exhaust system, the following exhaust temperature sensors are counted upward from the engine outlet to the exhaust system end. The Engine Control Module (ECM) supplies 5 V to the exhaust gas temperature signal circuit and supplies a ground to the low reference circuit. The exhaust gas temperature sensor temperature information is used by the ECM during the exhaust gas particulate filter cleaning process. The Diagnostic Trouble Code (DTC) will ve set when the ECM detects that the exhaust gas temperature sensor is greater than 900 Ω for greater than 2 s.

OBDII Code P0546 2014 GMC Sierra - Exhaust Gas Temperature Sensor 1 Circuit High Voltage - AutoCodes.com — P0546 2014 GMC Sierra Code - Exhaust Gas Temperature Sensor 1 Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0546 2014 GMC Sierra?

Faulty Exhaust Gas Temperature Sensor (EGTS) 1
Exhaust Gas Temperature Sensor 1 harness is open or shorted
Exhaust Gas Temperature Sensor 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0546 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

After starting the engine, the exhaust gas temperature sensor temperature should rise steadily, then stabilize after the engine reaches operating temperature. Exhaust gas temperature sensors may fail intermittently while operating under extreme temperatures. Review the Freeze Frame/Failure Records to verify the failure criteria.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0546 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0546 2014 GMC Sierra code?

Need more information on how to fix the P0546 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0546 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0546 2014 GMC Sierra Code

1. What does OBDII code P0546 mean on a 2014 GMC Sierra?

P0546 indicates a high voltage issue in the Exhaust Gas Temperature (EGT) Sensor 1 circuit, meaning the sensor is detecting unusually high exhaust gas temperatures or a circuit malfunction.

2. What are the symptoms of code P0546 on a 2014 GMC Sierra?

Common symptoms include the check engine light turning on, reduced fuel efficiency, poor engine performance, and in some cases, the vehicle entering limp mode.

3. What causes code P0546 on a 2014 GMC Sierra?

The code can be triggered by a faulty EGT sensor, damaged or corroded wiring, poor electrical connections, or excessive exhaust temperatures caused by engine issues.

4. Can I drive my 2014 GMC Sierra with code P0546?

Driving with code P0546 is not recommended as it may indicate high exhaust temperatures, which can damage other components like the catalytic converter or turbocharger.

5. How is code P0546 diagnosed?

A technician will use a scan tool to confirm the code, inspect the EGT sensor and wiring for damage, and test the sensorâ€™s voltage readings to identify the problem.

6. How do you fix code P0546 on a 2014 GMC Sierra?

Repairs may involve replacing the EGT sensor, repairing or replacing damaged wiring, cleaning corroded connections, or addressing underlying engine issues causing high exhaust temperatures.

7. How much does it cost to fix code P0546 on a 2014 GMC Sierra?

Repair costs vary but typically range from $150 to $300 for parts and labor to replace the EGT sensor. Additional costs may apply if wiring or other components are involved.

8. Where is Exhaust Gas Temperature Sensor 1 located on a 2014 GMC Sierra?

The EGT Sensor 1 is typically located in the exhaust system upstream of the catalytic converter, often near the turbocharger if equipped.

9. Can a faulty EGT sensor cause other problems in my 2014 GMC Sierra?

Yes, a faulty EGT sensor can lead to incorrect engine management, reduced fuel efficiency, and potential damage to the exhaust system or turbocharger if not addressed.

10. How can I prevent code P0546 from recurring on my 2014 GMC Sierra?

Regular maintenance, inspecting the exhaust system for damage, and promptly addressing any check engine light warnings can help prevent this issue from recurring.