P0545 Subaru Code - Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 1
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 1, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0545 Subaru indicates Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 1, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0545 Subaru Description
What are the Possible Causes of the DTC P0545 Subaru?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 1
- Exhaust Gas Temperature Sensor Bank 1 Sensor 1 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 1 Sensor 1 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P0545 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0545 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0545 Subaru code?
Need more information on how to fix the P0545 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0545 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0545 Subaru Code
1. What are the common symptoms of OBDII code P0545 in a Subaru?
The common symptoms of P0545 in a Subaru include decreased fuel efficiency, engine misfires, rough idling, and potential issues with the exhaust system.
2. What can cause the OBDII code P0545 in a Subaru?
The P0545 code in a Subaru is typically caused by a faulty exhaust gas temperature (EGT) sensor, damaged wiring or connectors related to the sensor, or a malfunction in the sensor circuit.
3. How serious is the OBDII code P0545 in a Subaru?
While P0545 may not cause immediate harm to the vehicle, it can lead to decreased engine performance and potential long-term damage if left unresolved. It is recommended to address the issue promptly to avoid further complications.
4. How can I diagnose the OBDII code P0545 in my Subaru?
Diagnosing P0545 involves using an OBDII scanner to retrieve the code, checking the EGT sensor and related wiring for any visible damage, and testing the sensor's resistance to determine if it is functioning correctly.
5. Can I drive my Subaru with the OBDII code P0545?
It is not recommended to drive your Subaru with the P0545 code present, as it can lead to decreased engine performance and potential damage over time. It is best to address the issue before continuing to drive the vehicle.
6. What are some repair tips for fixing the OBDII code P0545 in a Subaru?
Repairing P0545 in a Subaru may involve replacing the faulty EGT sensor, repairing damaged wiring or connectors, and clearing the trouble code with an OBDII scanner. It is also advisable to perform a thorough inspection of the exhaust system.
7. How much does it cost to fix the OBDII code P0545 in a Subaru?
The cost of fixing P0545 in a Subaru can vary depending on the extent of the issue and the necessary repairs. Replacing the EGT sensor or repairing wiring may cost anywhere from $100 to $300, including parts and labor.
8. Can a DIY enthusiast fix the OBDII code P0545 in a Subaru?
If you have experience with automotive repairs and the necessary tools, you may be able to fix P0545 in your Subaru yourself. However, it is recommended to consult with a professional mechanic for accurate diagnosis and repair guidance.
9. How long does it take to repair the OBDII code P0545 in a Subaru?
The time required to repair P0545 in a Subaru can vary depending on the specific issue and the expertise of the person performing the repairs. In general, it may take a few hours to a full day to diagnose and fix the problem.
10. Will the check engine light turn off automatically after fixing the OBDII code P0545 in a Subaru?
After repairing P0545 in a Subaru and clearing the trouble code, the check engine light should turn off on its own if the issue has been successfully resolved. If the light persists, further diagnosis may be necessary.
Discuss the causes and fixes for P0545 Subaru OBDII Code
Code P0545 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
