P0544 GMC Code - Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 1, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0544 GMC indicates Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 1, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0544 GMC Description
What are the Possible Causes of the DTC P0544 GMC?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 1
- Exhaust Gas Temperature Sensor Bank 1 Sensor 1 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 1 Sensor 1 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P0544 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0544 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0544 GMC code?
Need more information on how to fix the P0544 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0544 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0544 GMC Code
1. What are common symptoms of OBDII code P0544 GMC?
The common symptoms of OBDII code P0544 GMC include poor engine performance, reduced fuel efficiency, and potential issues with the exhaust system.
2. What does OBDII code P0544 GMC mean?
OBDII code P0544 GMC indicates a problem with the Exhaust Gas Temperature (EGT) Sensor Circuit for Bank 1 Sensor 1 in the vehicle's exhaust system.
3. What are the possible causes of OBDII code P0544 GMC?
The possible causes of OBDII code P0544 GMC include a faulty EGT sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.
4. How can I diagnose the issue related to OBDII code P0544 GMC?
Diagnosing OBDII code P0544 GMC involves using a diagnostic scanner to retrieve the code, checking the EGT sensor and its wiring for any visible damage, and testing the sensor's resistance and voltage.
5. Can I still drive my vehicle with OBDII code P0544 GMC?
It is not recommended to drive your vehicle with OBDII code P0544 GMC, as it can lead to further damage to the engine or exhaust system and may result in poor performance.
6. How can I repair OBDII code P0544 GMC?
To repair OBDII code P0544 GMC, you may need to replace the faulty EGT sensor, repair any damaged wiring or connectors, or reprogram the engine control module if necessary.
7. Is it safe to reset the OBDII code P0544 GMC without fixing the underlying issue?
It is not recommended to reset OBDII code P0544 GMC without fixing the underlying issue, as the problem will likely persist and may lead to more severe engine or exhaust system issues.
8. How much does it typically cost to repair OBDII code P0544 GMC?
The cost to repair OBDII code P0544 GMC can vary depending on the extent of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast repair OBDII code P0544 GMC?
A DIY enthusiast with automotive repair experience may be able to repair OBDII code P0544 GMC by following the vehicle's service manual and using the necessary tools and equipment.
10. How often does OBDII code P0544 GMC occur in GMC vehicles?
OBDII code P0544 GMC can occur in GMC vehicles with faulty EGT sensors or related circuit issues, but the frequency may vary depending on the model and age of the vehicle.
Discuss the causes and fixes for P0544 GMC OBDII Code
Code P0544 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.