AutoCodes – Chrysler – P0514 Chrysler

P0514 Chrysler Code - Temperature Sensor Rationality

Quick Answer

The Battery Temperature Sensor (BTS) is attached to the battery tray located under the battery. Common causes include Faulty Battery Temperature Sensor, Battery Temperature Sensor harness is open or shorted, Battery Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0514 Chrysler indicates Temperature Sensor Rationality.
Common causes: Common causes include Faulty Battery Temperature Sensor, Battery Temperature Sensor harness is open or shorted, Battery Temperature Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,947

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0514 Chrysler Description

The Battery Temperature Sensor (BTS) is attached to the battery tray located under the battery.
The BTS is used to determine the battery temperature and control battery charging rate. This temperature data, along with data from monitored line voltage, is used by the PCM to vary the battery charging rate. System voltage will be higher at colder temperatures and is gradually reduced at warmer temperatures.
The PCM sends 5 volts to the sensor and is grounded through the sensor return line. As temperature increases, resistance in the sensor decreases and the detection voltage at the PCM increases.
The BTS is also used for OBD II diagnostics. Certain faults and OBD II monitors are either enabled or disabled, depending upon BTS input (for example, disable purge and enable Leak Detection Pump (LDP) and O2 sensor heater tests). Most OBD II monitors are disabled below 20Â°F.

OBDII Code P0514 Chrysler - Temperature Sensor Rationality - AutoCodes.com — P0514 Chrysler Code - Temperature Sensor Rationality

What does this mean?

What are the Possible Causes of the DTC P0514 Chrysler?

Faulty Battery Temperature Sensor
Battery Temperature Sensor harness is open or shorted
Battery Temperature Sensor circuit poor electrical connection

How to Fix the DTC P0514 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0514 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0514 Chrysler code?

Need more information on how to fix the P0514 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0514 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.