P0509 Dodge Code - Idle Air Control Valve Sense Circuit High
Quick Answer
The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Faulty Idle Air Control (IAC) motor, Idle Air Control (IAC) motor harness is open or shorted, Idle Air Control (IAC) motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0509 Dodge indicates Idle Air Control Valve Sense Circuit High.
- Common causes
- Common causes include Faulty Idle Air Control (IAC) motor, Idle Air Control (IAC) motor harness is open or shorted, Idle Air Control (IAC) motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0509 Dodge Description
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
What are the Possible Causes of the DTC P0509 Dodge?
- Faulty Idle Air Control (IAC) motor
- Idle Air Control (IAC) motor harness is open or shorted
- Idle Air Control (IAC) motor circuit poor electrical connection
How to Fix the DTC P0509 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0509 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0509 Dodge code?
Need more information on how to fix the P0509 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0509 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0509 Dodge Code
No Frequently Asked Questions about P0509 Dodge Code found.
Discuss the causes and fixes for P0509 Dodge OBDII Code
Code P0509 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.