AutoCodes – Jeep – P0508 Jeep

P0508 Jeep Code - Idle Air Control Valve Sense Circuit Low

Quick Answer

The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Faulty Idle Air Control (IAC) motor, Idle Air Control (IAC) motor harness is open or shorted, Idle Air Control (IAC) motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0508 Jeep indicates Idle Air Control Valve Sense Circuit Low.
Common causes: Common causes include Faulty Idle Air Control (IAC) motor, Idle Air Control (IAC) motor harness is open or shorted, Idle Air Control (IAC) motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 19,296

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0508 Jeep Description

The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed. The ECM calculates the actual engine speed from signals of crankshaft position sensor (POS) and camshaft position sensor.
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)

OBDII Code P0508 Jeep - Idle Air Control Valve Sense Circuit Low - AutoCodes.com — P0508 Jeep Code - Idle Air Control Valve Sense Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0508 Jeep?

Faulty Idle Air Control (IAC) motor
Idle Air Control (IAC) motor harness is open or shorted
Idle Air Control (IAC) motor circuit poor electrical connection

How to Fix the DTC P0508 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0508 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0508 Jeep code?

Need more information on how to fix the P0508 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0508 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.