AutoCodes – Mazda – P0507 Mazda

P0507 Mazda Code - Idle Control System RPM Higher Than Expected

Quick Answer

The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0507 Mazda indicates Idle Control System RPM Higher Than Expected.
Common causes: Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 42,142

How popular is this code, among other codes? Medium

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0507 Mazda Description

The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed. The ECM calculates the actual engine speed from signals of crankshaft position sensor (POS) and camshaft position sensor.
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)

OBDII Code P0507 Mazda - Idle Control System RPM Higher Than Expected - AutoCodes.com — P0507 Mazda Code - Idle Control System RPM Higher Than Expected

What does this mean?

What are the Possible Causes of the DTC P0507 Mazda?

Dirty throttle body
Electric throttle control actuator misadjusted or damaged
Faulty Electric throttle control actuator
Intake air leak
Poor electrical connection to the Intake Air Control (IAC) valve

How to Fix the DTC P0507 Mazda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

If there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to repair the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0507 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0507 Mazda code?

Need more information on how to fix the P0507 Mazda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0507 Mazda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0507 Mazda Code

1. What are the common symptoms of OBDII code P0507 in a Mazda?

- Common symptoms include high idle speed, fluctuating idle speed, engine stalling at idle, and potential increase in fuel consumption.

2. What are the possible causes of OBDII code P0507 in a Mazda?

- Common causes include a malfunctioning idle air control valve, vacuum leaks, throttle body issues, dirty or faulty Mass Air Flow (MAF) sensor, or a faulty Engine Control Module (ECM).

3. How can I diagnose the cause of OBDII code P0507 in my Mazda?

- Diagnose by checking for vacuum leaks, inspecting the idle air control valve, cleaning or replacing the MAF sensor, checking throttle body functionality, and scanning the ECM for any related error codes.

4. Can a dirty throttle body cause OBDII code P0507 in a Mazda?

- Yes, a dirty throttle body can disrupt the airflow and cause the idle control system to malfunction, leading to OBDII code P0507.

5. How can I fix OBDII code P0507 in my Mazda?

- Possible fixes include cleaning or replacing the idle air control valve, fixing any vacuum leaks, cleaning the throttle body, replacing the MAF sensor if necessary, and resetting the ECM.

6. Is it safe to continue driving with OBDII code P0507 in my Mazda?

- It is not recommended to drive for an extended period with this code as it can lead to further engine issues and decreased fuel efficiency.

7. Can a malfunctioning MAF sensor trigger OBDII code P0507 in a Mazda?

- Yes, a faulty or dirty MAF sensor can disrupt the air-fuel mixture, leading to higher than expected idle RPM and triggering code P0507.

8. What role does the idle air control valve play in triggering OBDII code P0507 in a Mazda?

- The idle air control valve regulates the amount of air entering the engine at idle. If it malfunctions, it can cause the RPM to be higher than expected, triggering code P0507.

9. Will resetting the ECM clear OBDII code P0507 in a Mazda?

- Resetting the ECM may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear after some driving cycles.

10. How can I prevent OBDII code P0507 from coming back in my Mazda after repair?

- Regular maintenance, such as cleaning the throttle body, replacing air filters, and ensuring proper engine tune-up, can help prevent the recurrence of code P0507.