AutoCodes – Chrysler – P0507 Chrysler

P0507 Chrysler Code - Idle Speed Performance Higher Than Excepted

Q: 1. What does the OBDII code P0507 mean for a Chrysler?

P0507 indicates that the engine idle speed is higher than the manufacturerâ€™s specified range, typically due to issues with the idle air control system or related components.

Q: 2. What are the common symptoms of a P0507 code on a Chrysler?

Symptoms may include a higher-than-normal idle speed, rough idling, poor fuel economy, and in some cases, a check engine light.

Q: 3. What causes the P0507 code on a Chrysler vehicle?

Common causes include a dirty or faulty throttle body, vacuum leaks, a malfunctioning idle air control valve, or issues with the PCV system.

Q: 4. How is the P0507 code diagnosed on a Chrysler?

A mechanic will use an OBDII scanner to verify the code, inspect the throttle body, check for vacuum leaks, and test the idle air control valve for proper operation.

Q: 5. Can a dirty throttle body trigger the P0507 code on a Chrysler?

Yes, a dirty or clogged throttle body can restrict airflow and cause the engine to idle at a higher speed, triggering the P0507 code.

Q: 6. How do vacuum leaks cause the P0507 code on a Chrysler?

Vacuum leaks allow unmetered air to enter the engine, which can increase idle speed and set the P0507 code.

Q: 7. Can I drive my Chrysler with a P0507 code?

While the vehicle may still be drivable, ignoring the issue can lead to poor fuel economy and potential engine damage over time. It's best to address it promptly.

Q: 8. How can I fix a P0507 code on my Chrysler?

Common fixes include cleaning the throttle body, repairing vacuum leaks, checking the idle air control valve, and inspecting the PCV system for faults.

Q: 9. Will resetting the check engine light clear the P0507 code permanently?

Resetting the light may turn it off temporarily, but if the underlying issue isnâ€™t fixed, the code will likely return.

Q: 10. How much does it cost to repair a P0507 code on a Chrysler?

Repair costs vary depending on the cause, ranging from $50 for cleaning the throttle body to several hundred dollars for replacing faulty components like the idle air control valve.

Quick Answer

With the engine running at idle, Mass Air Flow (MAF) Sensor <250 mg/tdc, air temp >-17.8°C (0°F) and <-7°C (19.4°F) enable after coolant temp >70°C (158°F) or air temp >-7°C (19.4°F), coolant temp >-7°C (19.4°F) <130°C (266°F), canister purge <100% duty cycle, and no VSS, MAF/MAP, ECT, TPS, ETC, CRK Sensor Diagnostic Trouble Code (DTC)s nor any fuel system or injector DTCs. Common causes include Air Induction System, Vacuum Leaks, Faulty Throttle Body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0507 Chrysler indicates Idle Speed Performance Higher Than Excepted.
Common causes: Common causes include Air Induction System, Vacuum Leaks, Faulty Throttle Body.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,413

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2021

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0507 Chrysler Description

With the engine running at idle, Mass Air Flow (MAF) Sensor <250 mg/tdc, air temp >-17.8°C (0°F) and <-7°C (19.4°F) enable after coolant temp >70°C (158°F) or air temp >-7°C (19.4°F), coolant temp >-7°C (19.4°F) <130°C (266°F), canister purge <100% duty cycle, and no VSS, MAF/MAP, ECT, TPS, ETC, CRK Sensor Diagnostic Trouble Code (DTC)s nor any fuel system or injector DTCs. The DTC will set when the engine speed is 200 RPM or more above idle speed for 7 seconds. Two Trip Fault. Three good trips to turn off the MIL.

OBDII Code P0507 Chrysler - Idle Speed Performance Higher Than Excepted - AutoCodes.com — P0507 Chrysler Code - Idle Speed Performance Higher Than Excepted

What does this mean?

What are the Possible Causes of the DTC P0507 Chrysler?

Air Induction System
Vacuum Leaks
Faulty Throttle Body
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0507 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0507 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0507 Chrysler code?

Need more information on how to fix the P0507 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0507 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0507 Chrysler Code

1. What does the OBDII code P0507 mean for a Chrysler?

P0507 indicates that the engine idle speed is higher than the manufacturerâ€™s specified range, typically due to issues with the idle air control system or related components.

2. What are the common symptoms of a P0507 code on a Chrysler?

Symptoms may include a higher-than-normal idle speed, rough idling, poor fuel economy, and in some cases, a check engine light.

3. What causes the P0507 code on a Chrysler vehicle?

Common causes include a dirty or faulty throttle body, vacuum leaks, a malfunctioning idle air control valve, or issues with the PCV system.

4. How is the P0507 code diagnosed on a Chrysler?

A mechanic will use an OBDII scanner to verify the code, inspect the throttle body, check for vacuum leaks, and test the idle air control valve for proper operation.

5. Can a dirty throttle body trigger the P0507 code on a Chrysler?

Yes, a dirty or clogged throttle body can restrict airflow and cause the engine to idle at a higher speed, triggering the P0507 code.

6. How do vacuum leaks cause the P0507 code on a Chrysler?

Vacuum leaks allow unmetered air to enter the engine, which can increase idle speed and set the P0507 code.

7. Can I drive my Chrysler with a P0507 code?

While the vehicle may still be drivable, ignoring the issue can lead to poor fuel economy and potential engine damage over time. It's best to address it promptly.

8. How can I fix a P0507 code on my Chrysler?

Common fixes include cleaning the throttle body, repairing vacuum leaks, checking the idle air control valve, and inspecting the PCV system for faults.

9. Will resetting the check engine light clear the P0507 code permanently?

Resetting the light may turn it off temporarily, but if the underlying issue isnâ€™t fixed, the code will likely return.

10. How much does it cost to repair a P0507 code on a Chrysler?

Repair costs vary depending on the cause, ranging from $50 for cleaning the throttle body to several hundred dollars for replacing faulty components like the idle air control valve.