P0507 2013 Nissan Rogue Code - Idle Control System RPM Higher Than Expected
Quick Answer
The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 2013 Nissan Rogue indicates Idle Control System RPM Higher Than Expected.
- Common causes
- Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0507 2013 Nissan Rogue Description
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
What are the Possible Causes of the DTC P0507 2013 Nissan Rogue?
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Intake air leak
- Poor electrical connection to the Intake Air Control (IAC) valve
How to Fix the DTC P0507 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
P0507 Code Relearn Idle Air Volume Relearn Procedure
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0507 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0507 2013 Nissan Rogue code?
Need more information on how to fix the P0507 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 2013 Nissan Rogue Code
1. What does OBDII code P0507 mean on a 2013 Nissan Rogue?
The P0507 code indicates that the idle control system RPM is higher than expected.
2. What are the common symptoms of OBDII code P0507 in a 2013 Nissan Rogue?
Common symptoms include high idle speed, rough idle, fluctuating idle speed, and potential stalling when coming to a stop.
3. What are the possible causes of OBDII code P0507 in a 2013 Nissan Rogue?
Potential causes include a dirty or faulty idle air control valve, vacuum leaks, throttle body issues, a malfunctioning mass airflow sensor, or a faulty engine coolant temperature sensor.
4. How can I diagnose the cause of OBDII code P0507 in my 2013 Nissan Rogue?
Diagnosis typically involves checking for vacuum leaks, inspecting the idle air control valve, cleaning the throttle body, testing the mass airflow sensor, and verifying the functionality of the engine coolant temperature sensor.
5. Can I continue driving my 2013 Nissan Rogue with OBDII code P0507?
It is generally not recommended to drive the vehicle with the P0507 code present, as it can lead to poor fuel economy, drivability issues, and potential further damage to the engine components.
6. How can I repair OBDII code P0507 in my 2013 Nissan Rogue?
Repairing the P0507 code may involve cleaning or replacing the idle air control valve, fixing vacuum leaks, cleaning the throttle body, replacing the mass airflow sensor, or addressing issues with the engine coolant temperature sensor.
7. Are there any DIY tips for fixing OBDII code P0507 in a 2013 Nissan Rogue?
DIY tips include checking for visible vacuum leaks, cleaning the throttle body with a throttle body cleaner, and inspecting the idle air control valve for dirt or debris.
8. How much does it cost to repair OBDII code P0507 on a 2013 Nissan Rogue?
The cost of repair can vary depending on the specific cause of the issue, but it may range from a few hundred to a thousand dollars if professional help is needed.
9. Will resetting the OBDII code P0507 on a 2013 Nissan Rogue make it go away permanently?
Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the P0507 code is not addressed, the code is likely to return.
10. Can a mechanic help me fix OBDII code P0507 on my 2013 Nissan Rogue?
Yes, a qualified mechanic can diagnose the issue accurately and perform the necessary repairs to fix the P0507 code in your 2013 Nissan Rogue.
Discuss the causes and fixes for P0507 2013 Nissan Rogue OBDII Code
Code P0507 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
