P0507 2010 Nissan Rogue Code - Idle Control System RPM Higher Than Expected
Quick Answer
The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 2010 Nissan Rogue indicates Idle Control System RPM Higher Than Expected.
- Common causes
- Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0507 2010 Nissan Rogue Description
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
What are the Possible Causes of the DTC P0507 2010 Nissan Rogue?
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Intake air leak
- Poor electrical connection to the Intake Air Control (IAC) valve
How to Fix the DTC P0507 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
P0507 Code Relearn Idle Air Volume Relearn Procedure
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0507 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0507 2010 Nissan Rogue code?
Need more information on how to fix the P0507 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 2010 Nissan Rogue Code
What does the OBDII code P0507 mean for a 2010 Nissan Rogue?
The code P0507 indicates that the Engine Control Module (ECM) has detected that the engine's idle RPM is higher than the expected range, suggesting a potential issue with the idle control system.
What are common symptoms of code P0507?
Common symptoms include a rough or unstable idle, increased engine RPM at idle, and in some cases, reduced fuel efficiency or engine stalling.
What could cause the P0507 code to trigger in a 2010 Nissan Rogue?
Possible causes include a vacuum leak, a malfunctioning idle air control valve (IAC), a dirty throttle body, or issues with the mass airflow sensor (MAF).
How can I diagnose the cause of the P0507 code?
Start by checking for vacuum leaks, inspect the IAC valve for proper operation, clean the throttle body, and ensure that the MAF sensor is functioning correctly.
Is it safe to drive a 2010 Nissan Rogue with the P0507 code?
While it may be drivable, it is not recommended to ignore the code, as it can lead to further engine performance issues and potential damage over time.
What repairs might be needed to fix the P0507 code?
Repairs could include replacing a faulty IAC valve, fixing vacuum leaks, cleaning or replacing the throttle body, or addressing any issues with the MAF sensor.
Can I reset the code P0507 after repairs?
Yes, once repairs are made, you can reset the code using an OBDII scanner. However, if the underlying issue is not resolved, the code may reappear.
How much does it typically cost to repair the issues related to code P0507?
Repair costs can vary widely depending on the specific issue, but typical repairs may range from $100 to $500, depending on parts and labor.
Will code P0507 affect my vehicle's emissions?
Yes, a high idle RPM can lead to increased emissions, potentially causing the vehicle to fail an emissions test.
Is there a way to temporarily alleviate symptoms before getting a repair?
You can try cleaning the throttle body and IAC valve, which may temporarily help with the idle issue until proper repairs are made.
Discuss the causes and fixes for P0507 2010 Nissan Rogue OBDII Code
Code P0507 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
