P0507 2010 Nissan Pathfinder Code - Idle Control System RPM Higher Than Expected
Quick Answer
The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 2010 Nissan Pathfinder indicates Idle Control System RPM Higher Than Expected.
- Common causes
- Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0507 2010 Nissan Pathfinder Description
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
What are the Possible Causes of the DTC P0507 2010 Nissan Pathfinder?
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Intake air leak
- Poor electrical connection to the Intake Air Control (IAC) valve
How to Fix the DTC P0507 2010 Nissan Pathfinder?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Pathfinder Idle Air Volume Learning Procedure
P0507 Code Relearn Idle Air Volume Relearn Procedure
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0507 2010 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0507 2010 Nissan Pathfinder code?
Need more information on how to fix the P0507 2010 Nissan Pathfinder code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 2010 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 2010 Nissan Pathfinder Code
1. What are the common symptoms of OBDII code P0507 in a 2010 Nissan Pathfinder?
The common symptoms of code P0507 include high idle speed, surging or fluctuating idle, stalling at idle, and the Check Engine Light being illuminated.
2. What causes the OBDII code P0507 to trigger in a 2010 Nissan Pathfinder?
The P0507 code is triggered when the Engine Control Module (ECM) detects that the idle speed is higher than expected based on the vehicle's programming and sensor inputs.
3. How serious is the OBDII code P0507 in a 2010 Nissan Pathfinder?
While the P0507 code may not cause immediate drivability issues, it can lead to poor fuel economy, increased emissions, and potential long-term engine damage if left unresolved.
4. Can a dirty or faulty idle air control valve (IAC) cause code P0507 in a 2010 Nissan Pathfinder?
Yes, a dirty or malfunctioning IAC valve can disrupt the engine's idle control system, leading to higher than expected idle speed and triggering code P0507.
5. What are some DIY repair tips for fixing OBDII code P0507 in a 2010 Nissan Pathfinder?
DIY repair tips for resolving code P0507 may include cleaning or replacing the idle air control valve, checking for vacuum leaks, inspecting the throttle body, and performing an ECM reset.
6. Is it safe to continue driving a 2010 Nissan Pathfinder with the OBDII code P0507 active?
It is generally not recommended to drive the vehicle with an active P0507 code, as it can negatively impact engine performance and fuel efficiency. It is best to address the underlying issue promptly.
7. Can a faulty throttle body contribute to the occurrence of OBDII code P0507 in a 2010 Nissan Pathfinder?
Yes, a faulty throttle body, particularly issues with the throttle position sensor or throttle plate alignment, can lead to high idle speed and trigger code P0507.
8. How can a mechanic diagnose the root cause of OBDII code P0507 in a 2010 Nissan Pathfinder?
A mechanic can diagnose the cause of code P0507 by performing a thorough inspection of the idle control system, checking for vacuum leaks, testing the IAC valve, examining the throttle body, and analyzing sensor data.
9. Is resetting the ECM a recommended step after repairing OBDII code P0507 in a 2010 Nissan Pathfinder?
Yes, resetting the ECM after repairing code P0507 can help clear the fault code and reset the idle control system adaptations to ensure proper operation.
10. What professional repairs may be needed to fix OBDII code P0507 in a 2010 Nissan Pathfinder?
Professional repairs for code P0507 may include replacing the idle air control valve, repairing vacuum leaks, cleaning or replacing the throttle body, and performing any necessary reprogramming of the ECM.
Discuss the causes and fixes for P0507 2010 Nissan Pathfinder OBDII Code
Code P0507 2010 Nissan Pathfinder comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
