P0507 2008 Nissan Rogue Code - Idle Control System RPM Higher Than Expected
Quick Answer
The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 2008 Nissan Rogue indicates Idle Control System RPM Higher Than Expected.
- Common causes
- Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0507 2008 Nissan Rogue Description
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
What are the Possible Causes of the DTC P0507 2008 Nissan Rogue?
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Intake air leak
- Poor electrical connection to the Intake Air Control (IAC) valve
How to Fix the DTC P0507 2008 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
P0507 Code Relearn Idle Air Volume Relearn Procedure
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0507 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0507 2008 Nissan Rogue code?
Need more information on how to fix the P0507 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 2008 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0507 in a 2008 Nissan Rogue?
- Common symptoms include high idle speed, rough idling, stalling at idle, and decreased fuel efficiency.
2. What causes the OBDII code P0507 to appear in a 2008 Nissan Rogue?
- The most common cause of code P0507 is a malfunction in the Idle Air Control (IAC) system, which can result in an excessively high idle speed.
3. How can I diagnose the issue causing OBDII code P0507 in my 2008 Nissan Rogue?
- Diagnosing the issue involves checking for vacuum leaks, inspecting the throttle body and IAC valve, and using a scan tool to monitor the idle speed.
4. Can a dirty throttle body contribute to the appearance of code P0507 in a 2008 Nissan Rogue?
- Yes, a dirty or clogged throttle body can disrupt airflow and lead to high idle speed, triggering the P0507 code.
5. What are some possible repair tips for addressing OBDII code P0507 in a 2008 Nissan Rogue?
- Repair tips may include cleaning the throttle body, replacing the IAC valve, checking for vacuum leaks, and performing an idle relearn procedure.
6. Is it safe to continue driving my 2008 Nissan Rogue with OBDII code P0507?
- It is not recommended to drive with code P0507 unresolved, as it can lead to engine performance issues and potential stalling situations.
7. Can a malfunctioning oxygen sensor trigger the OBDII code P0507 in a 2008 Nissan Rogue?
- While a failing oxygen sensor can impact fuel efficiency and engine performance, it is not a common cause of code P0507 specifically related to idle control.
8. How long does it typically take to repair OBDII code P0507 in a 2008 Nissan Rogue?
- The repair time can vary depending on the exact cause of the issue, but it may take anywhere from 1-3 hours for diagnosis and repair.
9. Will resetting the ECU clear the OBDII code P0507 in a 2008 Nissan Rogue?
- Resetting the ECU may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear after driving the vehicle.
10. Can low engine oil level contribute to the appearance of code P0507 in a 2008 Nissan Rogue?
- While low engine oil level can impact engine performance, it is not a direct cause of code P0507 related to the idle control system.
Discuss the causes and fixes for P0507 2008 Nissan Rogue OBDII Code
Code P0507 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
