AutoCodesToyota – P0504 2007 Toyota Camry

P0504 2007 Toyota Camry Code - Brake Switch Circuit 'A' / 'B' Correlation

Quick Answer

The stoplight switch is a duplex system that transmits two signals: STP and ST1-. Common causes include Faulty stop lamp switch, Blown stop lamp bulb, Brake switch harness open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0504 2007 Toyota Camry indicates Brake Switch Circuit 'A' / 'B' Correlation.
Common causes
Common causes include Faulty stop lamp switch, Blown stop lamp bulb, Brake switch harness open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,837
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 31, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0504 2007 Toyota Camry Description

The stoplight switch is a duplex system that transmits two signals: STP and ST1-. These two signals are used by the Engine Control Module (ECM) to monitor whether or not the brake system is working properly. If the signals, which indicate the brake pedal is being depressed and released, are detected simultaneously, the ECM interprets this as a malfunction in the stoplight switch and sets the Diagnostic Trouble Code (DTC).
OBDII Code P0504 2007 Toyota Camry - Brake Switch Circuit 'A' / 'B' Correlation - AutoCodes.com
P0504 2007 Toyota Camry Code - Brake Switch Circuit 'A' / 'B' Correlation

What are the Possible Causes of the DTC P0504 2007 Toyota Camry?

  • Faulty stop lamp switch
  • Blown stop lamp bulb
  • Brake switch harness open or shorted
  • Brake switch circuit poor electrical connection
  • STOP fuse
  • IGN fuse

How to Fix the DTC P0504 2007 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0504 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0504 2007 Toyota Camry code?

Need more information on how to fix the P0504 2007 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0504 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0504 2007 Toyota Camry Code

1. What does the OBDII code P0504 mean on a 2007 Toyota Camry?

P0504 indicates a fault in the brake switch circuit, specifically a mismatch or correlation issue between Brake Switch Circuit 'A' and 'B'.

2. What are the common symptoms of the P0504 code?

Symptoms include the brake lights not functioning properly, inability to shift out of park, cruise control malfunction, or the check engine light illuminating.

3. What causes the P0504 code to appear?

Common causes include a faulty brake light switch, damaged or corroded wiring, poor electrical connections, or a misaligned brake switch.

4. Can I drive my 2007 Toyota Camry with a P0504 code?

Driving is possible but not recommended, as malfunctioning brake lights or cruise control can pose a safety risk.

5. How do I diagnose the P0504 code?

Start by inspecting the brake light switch, wiring, and connectors for damage or corrosion. Use a multimeter to test the switch for proper voltage and continuity.

6. How do I fix the P0504 code in a 2007 Toyota Camry?

The most common fix is replacing the brake light switch. If wiring or connectors are damaged, repair or replace them as needed.

7. How much does it cost to repair a P0504 code?

Replacing a brake light switch typically costs $50–$150, including parts and labor. Wiring repairs may vary depending on complexity.

8. Can a P0504 code cause other issues?

Yes, it can prevent the vehicle from shifting out of park and disable cruise control, which may lead to inconvenience or safety concerns.

9. How can I prevent the P0504 code from recurring?

Ensure the brake light switch is properly installed and periodically check for wiring damage or corrosion in the brake switch circuit.

10. Will clearing the P0504 code fix the issue?

Clearing the code will turn off the check engine light temporarily, but the issue will return unless the root cause is resolved.

Discuss the causes and fixes for P0504 2007 Toyota Camry OBDII Code

Code P0504 2007 Toyota Camry comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play