AutoCodes – Mercury – P0500 Mercury

P0500 Mercury Code - Vehicle Speed Sensor 'A'

Quick Answer

The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0500 Mercury indicates Vehicle Speed Sensor 'A'.
Common causes: Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 12,552

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 29, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0500 Mercury Description

The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. After this signal is converted into a more precise rectangular waveform by the waveform shaping circuit inside the combination meter, it is then transmitted to the Engine Control Module (ECM). The ECM determines the vehicle speed based on the frequency of these pulse signals.

OBDII Code P0500 Mercury - Vehicle Speed Sensor 'A' - AutoCodes.com — P0500 Mercury Code - Vehicle Speed Sensor 'A'

What does this mean?

What are the Possible Causes of the DTC P0500 Mercury?

Faulty Vehicle Speed Sensor
Vehicle speed sensor harness or connectors is open or shorted
Vehicle speed sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0500 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for the following Mercury models:
1998-2002 Mercury Grand Marquis
1998-2002 Mercury Sable
1998-2001 Mercury Mountaineer
Mercury Factory Service Bulletin OBDII Code P0500

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0500 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0500 Mercury code?

Need more information on how to fix the P0500 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0500 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.