AutoCodes – KIA – P0500 KIA

P0500 KIA Code - Vehicle Speed Sensor Circuit

Quick Answer

The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0500 KIA indicates Vehicle Speed Sensor Circuit.
Common causes: Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 14,105

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0500 KIA Description

The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. After this signal is converted into a more precise rectangular waveform by the waveform shaping circuit inside the combination meter, it is then transmitted to the Engine Control Module (ECM). The ECM determines the vehicle speed based on the frequency of these pulse signals.

OBDII Code P0500 KIA - Vehicle Speed Sensor Circuit - AutoCodes.com — P0500 KIA Code - Vehicle Speed Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P0500 KIA?

Faulty Vehicle Speed Sensor
Vehicle speed sensor harness or connectors is open or shorted
Vehicle speed sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0500 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0500 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0500 KIA code?

Need more information on how to fix the P0500 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0500 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0500 KIA Code

1. What does the OBDII code P0500 mean on a Kia?

P0500 indicates a malfunction in the Vehicle Speed Sensor (VSS) circuit, which means the engine control module (ECM) is not receiving a proper signal from the VSS.

2. What are the common symptoms of the P0500 code on a Kia?

Symptoms include erratic or non-functional speedometer, ABS warning light, poor shifting performance (in automatic transmissions), and reduced fuel efficiency.

3. What causes the P0500 code to appear in a Kia?

Common causes include a faulty vehicle speed sensor, damaged wiring or connectors, a malfunctioning ECM, or an issue with the vehicleâ€™s anti-lock brake system.

4. Can I drive my Kia with a P0500 code?

While the vehicle may still function, driving with a P0500 code can lead to erratic performance, poor fuel economy, and potential safety issues due to incorrect speed readings.

5. How can I diagnose the P0500 code on my Kia?

Start by checking the wiring and connectors for damage or loose connections, inspect the VSS for faults, and use a multimeter to test the sensor's output and continuity.

6. How do I fix the P0500 code in a Kia?

Repairs may include replacing the faulty vehicle speed sensor, repairing damaged wiring or connectors, or in rare cases, reprogramming or replacing the ECM.

7. How much does it cost to fix the P0500 code on a Kia?

Repair costs vary but typically range from $150 to $300, depending on whether the issue is with the VSS, wiring, or ECM.

8. Can a bad ABS sensor cause the P0500 code on a Kia?

Yes, a malfunctioning ABS sensor or related wiring can sometimes trigger the P0500 code, as the ABS and VSS systems are often interconnected.

9. Will clearing the P0500 code fix the problem permanently?

Clearing the code will only remove it temporarily. The underlying issue must be diagnosed and repaired to prevent the code from returning.

10. Do I need special tools to fix the P0500 code on a Kia?

A basic OBDII scanner, multimeter, and wiring diagram are usually sufficient for diagnosis. Advanced tools may be needed for ECM reprogramming or ABS-related issues.