AutoCodes – Nissan – P0500 2013 Nissan Rogue

P0500 2013 Nissan Rogue Code - Vehicle Speed Sensor

Quick Answer

The Engine Control Module (ECM) receives vehicle speed signals from two different paths via CAN communication line: One is from the Anti-lock Brake System (ABS) Actuator and Electric Unit (Control Unit) via the combination unit and the other is from Transmission Control Module (TCM). Common causes include Faulty Vehicle Speed Sensor, Faulty Wheel Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0500 2013 Nissan Rogue indicates Vehicle Speed Sensor.
Common causes: Common causes include Faulty Vehicle Speed Sensor, Faulty Wheel Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,182

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 21, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0500 2013 Nissan Rogue Description

OBDII Code P0500 2013 Nissan Rogue - Vehicle Speed Sensor - AutoCodes.com — P0500 2013 Nissan Rogue Code - Vehicle Speed Sensor

What does this mean?

What are the Possible Causes of the DTC P0500 2013 Nissan Rogue?

Faulty Vehicle Speed Sensor
Faulty Wheel Speed Sensor
Vehicle speed sensor harness or connectors is open or shorted
Vehicle speed sensor circuit poor electrical connection
Wheel speed sensor harness or connectors is open or shorted
Wheel speed sensor circuit poor electrical connection
Faulty Anti-lock Brake System (ABS) Control Unit
Faulty Engine Control Module (ECM)

How to Fix the DTC P0500 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing any parts try cleaning all the Wheel and Transmission Speed Sensors and sensor's gear, and clear the code. If the light comes back you may have to replace the sensor.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0500 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0500 2013 Nissan Rogue code?

Need more information on how to fix the P0500 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0500 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0500 2013 Nissan Rogue Code

1. What does OBDII code P0500 for a 2013 Nissan Rogue indicate?

The OBDII code P0500 for a 2013 Nissan Rogue indicates a malfunction in the vehicle speed sensor circuit.

2. What are the common symptoms of a P0500 code in a 2013 Nissan Rogue?

Common symptoms of a P0500 code in a 2013 Nissan Rogue include erratic speedometer readings, inoperative cruise control, and an illuminated ABS warning light.

3. What are some possible causes of a P0500 code in a 2013 Nissan Rogue?

Possible causes of a P0500 code in a 2013 Nissan Rogue include a faulty vehicle speed sensor, damaged wiring or connectors in the speed sensor circuit, or a malfunctioning ABS module.

4. How can I diagnose a P0500 code in my 2013 Nissan Rogue?

To diagnose a P0500 code in a 2013 Nissan Rogue, you can use a scan tool to check for the code, visually inspect the speed sensor and its wiring, and perform a continuity test on the sensor circuit.

5. Can I still drive my 2013 Nissan Rogue with a P0500 code?

It is not recommended to drive your 2013 Nissan Rogue with a P0500 code, as it can affect the vehicle's speedometer accuracy and potentially lead to further issues with the ABS system.

6. How can I repair a P0500 code in my 2013 Nissan Rogue?

Repairing a P0500 code in a 2013 Nissan Rogue typically involves replacing the vehicle speed sensor, repairing any damaged wiring or connectors, and clearing the code with a scan tool.

7. Will a P0500 code in my 2013 Nissan Rogue affect fuel economy?

While a P0500 code itself may not directly affect fuel economy, it is important to address the underlying issue promptly to prevent any potential impact on the vehicle's overall performance.

8. Is the vehicle speed sensor easy to access in a 2013 Nissan Rogue?

The location of the vehicle speed sensor in a 2013 Nissan Rogue may vary, but it is typically located on the transmission or differential housing, making it relatively accessible for replacement.

9. Can a P0500 code in a 2013 Nissan Rogue cause transmission shifting problems?

In some cases, a P0500 code in a 2013 Nissan Rogue can cause transmission shifting problems due to inaccurate speed sensor readings, which may disrupt the vehicle's shift points.

10. How long does it take to repair a P0500 code in a 2013 Nissan Rogue?

The time required to repair a P0500 code in a 2013 Nissan Rogue can vary depending on the exact cause of the issue, but it typically takes a few hours to diagnose, replace the sensor, and clear the code.