AutoCodes – Audi – P0476 Audi

P0476 Audi Code - Exhaust Pressure Control Valve 'A' Range/Performance

Q: 1. What are the common symptoms of OBDII code P0476 in an Audi?

The common symptoms of code P0476 include reduced engine performance, decreased fuel efficiency, rough idling, and potential black smoke from the exhaust.

Q: 2. What can cause the OBDII code P0476 to trigger in an Audi?

The code P0476 is typically triggered in an Audi due to issues with the exhaust pressure control valve, such as a faulty valve, wiring problems, or a damaged sensor.

Q: 3. How serious is OBDII code P0476 in an Audi?

Code P0476 should be addressed promptly to prevent potential damage to the engine or other emissions control components. Ignoring the issue can lead to further complications and increased repair costs.

Q: 4. Can I still drive my Audi with OBDII code P0476?

It is not recommended to continue driving your Audi with code P0476 present, as it can lead to poor engine performance and potential long-term damage. It is advisable to have the issue diagnosed and repaired as soon as possible.

Q: 5. How can I diagnose the cause of OBDII code P0476 in my Audi?

Diagnosing code P0476 involves using a diagnostic scanner to retrieve the fault code, inspecting the exhaust pressure control valve and related components, and testing the wiring and sensor for any faults.

Q: 6. What are some repair tips for OBDII code P0476 in an Audi?

Repairing code P0476 may involve replacing the exhaust pressure control valve, repairing or replacing damaged wiring, and resetting the fault code using a diagnostic scanner. It is recommended to follow Audi's specific repair procedures.

Q: 7. Can a DIY enthusiast fix OBDII code P0476 in an Audi?

While some DIY enthusiasts may have the skills to address code P0476, it is recommended to consult a professional mechanic or Audi dealership for accurate diagnosis and repair. Working with emissions control systems requires specific knowledge and tools.

Q: 8. Will resetting the OBDII code P0476 make it go away permanently?

Resetting the fault code without addressing the underlying issue will not permanently resolve code P0476. It is crucial to diagnose the cause of the code and complete the necessary repairs to prevent it from reoccurring.

Q: 9. How much does it typically cost to repair OBDII code P0476 in an Audi?

The cost of repairing code P0476 in an Audi can vary depending on the specific cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from different repair shops for an accurate estimate.

Q: 10. Can a faulty exhaust pressure control valve cause other OBDII codes to trigger in an Audi?

Yes, a faulty exhaust pressure control valve can cause other related OBDII codes to trigger, such as P0477 or P0478. It is essential to address all fault codes to ensure proper functioning of the emissions control system.

Quick Answer

Exhaust Back Pressure Regulator - Is a variable position valve that controls exhaust back pressure during cold ambient temperatures to increase cab heat and decrease the amount of time needed to defrost the windshield. Common causes include Faulty Exhaust Back Pressure Valve, Exhaust Back Pressure Valve harness is open or shorted, Exhaust Back Pressure Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0476 Audi indicates Exhaust Pressure Control Valve 'A' Range/Performance.
Common causes: Common causes include Faulty Exhaust Back Pressure Valve, Exhaust Back Pressure Valve harness is open or shorted, Exhaust Back Pressure Valve circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,204

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 25, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0476 Audi Description

Exhaust Back Pressure Regulator - Is a variable position valve that controls exhaust back pressure during cold ambient temperatures to increase cab heat and decrease the amount of time needed to defrost the windshield. The Engine Control Module (ECM) uses the measured exhaust back pressure, (ambient) intake air temperature, engine oil temperature and engine load to determine the desired exhaust back pressure. Valve position is controlled by switching the output signal circuit to 12 volts inside the ECM. On/off time is modulated from 0 to 99 % dependent upon the exhaust back pressure desired.
Upon each initial engine start-up, the ECM exercises the exhaust back pressure valve by commanding it to cycle on and off once. If upon start-up the temperature of intake air sensed by the Intake Air Temperature (IAT) sensor is < 37°F (5°C) and the oil temperature sensed by the Engine Oil Temperature (EOT) sensor is between 32°-140°F (0-60°C) it will continue to keep the back pressure valve partially closed. As the oil temperature rises during engine operation, the ECM will control the valve in response to the rising oil temperature.

OBDII Code P0476 Audi - Exhaust Pressure Control Valve 'A' Range/Performance - AutoCodes.com — P0476 Audi Code - Exhaust Pressure Control Valve 'A' Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0476 Audi?

Faulty Exhaust Back Pressure Valve
Exhaust Back Pressure Valve harness is open or shorted
Exhaust Back Pressure Valve circuit poor electrical connection

How to Fix the DTC P0476 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the Exhaust Back Pressure Valve (EBPV) butterfly valve is opening and closing freely and not sticking. If it seems to move freely you can then check the connector and circuit for the EBPV solenoid.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0476 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0476 Audi code?

Need more information on how to fix the P0476 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0476 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0476 Audi Code

1. What are the common symptoms of OBDII code P0476 in an Audi?

The common symptoms of code P0476 include reduced engine performance, decreased fuel efficiency, rough idling, and potential black smoke from the exhaust.

2. What can cause the OBDII code P0476 to trigger in an Audi?

The code P0476 is typically triggered in an Audi due to issues with the exhaust pressure control valve, such as a faulty valve, wiring problems, or a damaged sensor.

3. How serious is OBDII code P0476 in an Audi?

Code P0476 should be addressed promptly to prevent potential damage to the engine or other emissions control components. Ignoring the issue can lead to further complications and increased repair costs.

4. Can I still drive my Audi with OBDII code P0476?

It is not recommended to continue driving your Audi with code P0476 present, as it can lead to poor engine performance and potential long-term damage. It is advisable to have the issue diagnosed and repaired as soon as possible.

5. How can I diagnose the cause of OBDII code P0476 in my Audi?

Diagnosing code P0476 involves using a diagnostic scanner to retrieve the fault code, inspecting the exhaust pressure control valve and related components, and testing the wiring and sensor for any faults.

6. What are some repair tips for OBDII code P0476 in an Audi?

Repairing code P0476 may involve replacing the exhaust pressure control valve, repairing or replacing damaged wiring, and resetting the fault code using a diagnostic scanner. It is recommended to follow Audi's specific repair procedures.

7. Can a DIY enthusiast fix OBDII code P0476 in an Audi?

While some DIY enthusiasts may have the skills to address code P0476, it is recommended to consult a professional mechanic or Audi dealership for accurate diagnosis and repair. Working with emissions control systems requires specific knowledge and tools.

8. Will resetting the OBDII code P0476 make it go away permanently?

Resetting the fault code without addressing the underlying issue will not permanently resolve code P0476. It is crucial to diagnose the cause of the code and complete the necessary repairs to prevent it from reoccurring.

9. How much does it typically cost to repair OBDII code P0476 in an Audi?

The cost of repairing code P0476 in an Audi can vary depending on the specific cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from different repair shops for an accurate estimate.

10. Can a faulty exhaust pressure control valve cause other OBDII codes to trigger in an Audi?

Yes, a faulty exhaust pressure control valve can cause other related OBDII codes to trigger, such as P0477 or P0478. It is essential to address all fault codes to ensure proper functioning of the emissions control system.