AutoCodes – Ford – P0456 2012 Ford Fusion

P0456 2012 Ford Fusion Code - EVAP System Leak Detected Gross Leak/No Flow

Quick Answer

The Powertrain Control Module (PCM) monitors the complete evaporative emission (EVAP) control system for the presence of a very small fuel vapor leak. Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0456 2012 Ford Fusion indicates EVAP System Leak Detected Gross Leak/No Flow.
Common causes
Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 17,459
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 25, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0456 2012 Ford Fusion Description

The Powertrain Control Module (PCM) monitors the complete evaporative emission (EVAP) control system for the presence of a very small fuel vapor leak. The system failure occurs when a fuel vapor leak from an opening as small as 0.508 mm (0.020 inch) is detected by the EVAP running loss monitor test.
OBDII Code P0456 2012 Ford Fusion - EVAP System Leak Detected Gross Leak/No Flow - AutoCodes.com
P0456 2012 Ford Fusion Code - EVAP System Leak Detected Gross Leak/No Flow

What are the Possible Causes of the DTC P0456 2012 Ford Fusion?

  • Missing or loose fuel cap
  • Incorrect fuel filler cap used
  • Fuel filler cap remains open or fails to close
  • Foreign matter caught in fuel filler cap
  • Evaporative Emission (EVAP) canister or fuel tank leaks
  • Evaporative Emission (EVAP) system hose leaking
  • Fuel tank leaking

How to Fix the DTC P0456 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0456 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0456 2012 Ford Fusion code?

Need more information on how to fix the P0456 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0456 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0456 2012 Ford Fusion Code

1. What does the OBDII code P0456 mean on a 2012 Ford Fusion?

P0456 indicates a small leak in the EVAP (Evaporative Emission Control) system, which prevents fuel vapors from escaping into the atmosphere.

2. What are the common symptoms of code P0456 in a 2012 Ford Fusion?

The most common symptom is the Check Engine Light turning on. There are usually no noticeable performance issues.

3. What causes the P0456 code on a 2012 Ford Fusion?

Common causes include a loose or damaged gas cap, a cracked EVAP hose, a faulty purge valve, or a leak in the charcoal canister.

4. Can a loose gas cap trigger the P0456 code on a 2012 Ford Fusion?

Yes, a loose or improperly sealed gas cap is one of the most common causes of this code.

5. How can I fix the P0456 code on a 2012 Ford Fusion?

Start by tightening or replacing the gas cap. If the problem persists, inspect the EVAP system for leaks or damaged components.

6. How do I know if the gas cap is causing the P0456 code?

Inspect the gas cap for damage or missing seals. If it appears worn, replace it and clear the code to see if it resolves the issue.

7. Is it safe to drive a 2012 Ford Fusion with the P0456 code?

Yes, it is generally safe to drive, as the code does not indicate a performance issue, but it should be addressed to ensure emissions compliance.

8. How is a P0456 code diagnosed on a 2012 Ford Fusion?

A mechanic will use a scan tool to confirm the code, inspect the gas cap and EVAP lines, and may perform a smoke test to pinpoint the leak.

9. What tools are needed to repair a P0456 code on a 2012 Ford Fusion?

Basic tools include a gas cap replacement, a scan tool to clear the code, and possibly a smoke machine to locate small leaks.

10. How much does it cost to fix the P0456 code on a 2012 Ford Fusion?

Repair costs vary, but a gas cap replacement is inexpensive (around $20), while more extensive EVAP system repairs could range from $100 to $600 depending on the issue.

Discuss the causes and fixes for P0456 2012 Ford Fusion OBDII Code

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play